Overriding the system lock
While the message "Touch the OK
sensor for 5 seconds" is in the display,
^ touch and hold the lock symbol 0 for
5 seconds.
As soon as you switch the coffee
machine off, the system lock will be
activated again and the coffee
machine is locked once more.
Water hardness
See "Setting up and using the coffee
machine" for information about water
hardness.
Display brightness
You can set the display brightness
using the bar chart.
Volume
You can set the volume of buzzer and
keypad tones using the bar chart.
Plate warmer
You can connect the plate warmer
directly to the coffee machine with a
special connection cable (optional
accessory). Suitable warming drawers
for this coffee machine are listed earlier
in these operating instructions. You can
also contact Miele should you require
further information.
The special connection cable needed
can be purchased by contacting Miele.
After connecting the appliance to the
electricity supply, you need to activate
the plate warmer in the "Settings" menu.
You can choose one of the following
options:
– Automatic: The plate warmer
switches on and off with the coffee
machine.
If you have programmed the "Switch
on at" timer, the plate warmer will
switch on approx. 30 minutes before
the coffee machine switches on in
order to pre-heat your cups.
– On: You can switch the plate warmer
on or off at any time independently of
the coffee machine.
– Off: The plate warmer cannot be
switched on because no electricity is
being supplied by the coffee
machine.
The plate warmer is set to "Off" at the
factory.
Spout adjustment
You can find information on adjusting
the height of the spout in the "Spout
adjustment" section of this booklet.
Settings
49