Audio Upload; Alarm Server - Siemens CCMC1315-LP Configuration

9.4.2

Audio Upload

9.4.3

Alarm Server

Building Technologies
Fire Safety & Security Products
detected, the alarm out will be triggered immediately as well.
Output hold time Set the alarm output hold time. This function is used when connecting to
alarm output terminals and activating a siren, buzzer or emergency light.
You can choose which audio file (*.wav) you want to upload as a voice alarm
message to the SD card from your PC. There are 4 audio events available for
uploading. You can select in the appropriate menu which audio event is to be
played with which event (Motion or Alarm input 1).
1. Select Alarm > Audio Upload.
2. Click Browse to select the desired audio file on you hard disk.
3. Click Upload.
1. Select Alarm > Alarm Server.
2. Configure the options as described in the table below.
3. Click Save.
Conditions Choose alarm or motion event.
Alarm server IP Define the target alarm server IP address.
address
Alarm server port Define the target alarm server port number.
number
Configuration
CCMx1315-LP Configuration Manual EN
05.05.2009
39