2. Checking the connection status
Perform the Ethernet status check of the GOT to check that the GOT can communicate with the PLC.
The Ethernet status check function checks the connection status between the GOT and a device on the
Ethernet network by sending a ping request.
Before performing the Ethernet status check, check that the GOT and the PLC are powered on.
1
TRANSFERRING THE PROJECT
2. CONNECTING THE GOT AND THE PLC
Touch the utility call key on the GOT to display
1
the utility main menu.
The utility call key is set to the top left corner of
the GOT screen (press the key for 2 seconds).
The settings can be changed with GT
Designer3.
The utility main menu is displayed.
2. CONNECTING THE GOT AND THE PLC
54