RPS
6
RPS Setup and Maintenance
6.1
Modifying RPS
NOTICE!
To modify the current RPS installation, you must use the original installation files.
i
–
–
To install other features that were not initially installed or remove currently installed features:
1.
Figure 6.1 Add/Remove Programs Window
2.
3.
Figure 6.2 RPS Setup Maintenance Window
Bosch Security Systems, Inc.
If RPS was installed from the CD-ROM, you must use the CD-ROM.
If RPS was installed from a folder containing the installation files, you must use the same
folder in the location it resided at when RPS was installed.
Select Start > Settings > Control Panel > Add/Remove Programs. The Add/Remove
Programs dialog opens.
Scroll down the list until you see RPS. Click RPS to select it.
Click Change/Remove. The RPS Setup Maintenance dialog opens.
Installation Guide
RPS Setup and Maintenance | en
4998141259 | 09 | 2008.10
79