Advertisement
Available languages
Available languages
This product is not a toy. Provide safe instructions and
supervision for proper use.
Do not charge other devices while the product is contacting with
your body (e.g., in a pocket).
Do not stick on any metal object, even a piece of aluminum foil,
Owner's Manual
to any surface of the portable charger. It may overheat.
Portable Charger
Caution
for
Failure to follow the following safety instructions can lead to
Mobile Devices
overheating, personal injury, property damage or damage to this
product.
Do not use this product in an ambient temperature range outside
QE-PL202
41°F (5°C) - 95°F (35°C).
Model No.
Avoid high humidity or dust when using or storing this product.
Portable Charger (5300 mAh)
Do not expose this product to direct sunlight or similar heat
compatible with
sources.
Qi Wireless Charging
Do not place objects on this product. Place on a stable and even
surface.
Do not charge using a vehicle power adapter. Use only
recommended power sources in this manual.
QE-PL102
Do not use the product if the USB cable attachment is damaged,
Model No.
or the USB terminal is loose.
Portable Charger (2650 mAh)
compatible with
Precautions for Use
Qi Wireless Charging
WARNING: Risk of Fire and Burns. Do Not Open, Crush, Heat Above
140°F (60°C) or Incinerate. Follow Manufacturer's Instructions.
If noise interferes with the radio or TV, distance the portable
charger 3 ft. (1 m) or more.
Thank you for choosing Panasonic.
Before using the product, be sure to read this "Owner's manual" and follow
long time, be sure to charge it before use.
the instructions to use the product correctly.
It is normal for this product to generate a small amount of heat
After reading the owner's manual, store it in a handy location for future
while supplying power or while being charged.
reference.
It is normal for this product to generate a small buzzing sound while
In addition, observe all warnings and cautions on the product.
supplying power or while being charged.
This product cannot be charged while supplying power.
QE-PL102AATR
Avoid storing this product fully charged or totally discharged. Such
S1113-0
conditions will affect its performance and useful life.
Wireless charging may not be possible if this product was stored
Important Safety Instructions
Be sure to follow the instructions
for a long time. See "Troubleshooting" on pages 6 and 7.
Read these safety instructions carefully and completely. Not
Included Items
and property damage.
The symbols below are used to explain the precautions to
<QE-PL202>
<QE-PL102>
prevent risk of people and damage of property.
The symbols below indicate the levels of risk and damage
resulting from wrong operation.
WARNING alerts to a potentially hazardous
Warning
situation. If not avoided it could result in
Owner's Manual
Portable Charger
for
Mobile Devices
death or serious injury.
Model No.
QE-PL202
Portable Charger (5300 mAh)
compatible with
Portable Charger
CAUTION alerts to a potentially hazardous
Qi Wireless Charging
Caution
QE-PL102
situation. If not avoided it may result in minor
Model No.
Portable Charger (2650 mAh)
compatible with
Qi Wireless Charging
<Included in QE-PL202>
<Included in QE-PL102>
or moderate injury.
Thank you for choosing Panasonic.
Before using the product, be sure to read this "Owner's manual" and follow
the instructions to use the product correctly.
After reading the owner's manual, store it in a handy location for future
reference.
In addition, observe all warnings and cautions on the product.
QE-PL102AATR
S1113-0
Warning
Owner's Manual
Failure to follow the following safety instructions can lead to
USB Cable Attachment
damage to this product.
Do not alter, short-circuit the terminal or allow conductive parts
to touch the terminal; do not disassemble or modify this product.
Features
Do not charge via a terminal except for a USB A output terminal
of a computer or other devices.
The portable charger is designed to supply power to a mobile
device when you are on the go.
store this product at high temperature.
It can be used with many kinds of mobile devices, such as
Use this Qi-compatible portable charger only with Qi-compatible
smartphones, tablets and digital cameras.
wireless charger.
QE-PL202: charge two portable electronic devices at the same time.
Use a wireless charger with Qi logo. Using any other wireless charger
Major safety functions
· Overcharge protection
Do not place aluminum object or other metal objects between
· Over-discharge protection
this charger and the wireless charger.
Do not expose to water or other liquids.
· Overcurrent protection
· Abnormal temperature detection
Do not connect or disconnect the USB cable attachment with wet
hand.
Simply putting it on a wireless charger with Qi logo can start
Do not carry or store the product with a metal necklace or hair
charging without connecting a charging cable.
clip.
1
2
Any phone or other device carrying the Qi logo will
Usage
work with any charging surface that carries the Qi logo,
regardless of manufacturer or brand.
Precautions for using the USB cable attachment
Qi and the Qi logo are the trademarks of the Wireless
Power Consortium (WPC).
Store the cable of the USB cable attachment when it is not used.
Do not supply power or charge while the portable charger is hung or unstable.
It may not be possible to use the USB cable attachment depending on
Recycling Lithium Ion Batteries
the position of the computer's USB terminal. Also stable charging may
not be possible with some laptop computers. In that case, a USB cable
A lithium ion battery that is recyclable powers the product
for charging is required separately.
you have purchased.
Do not apply excessive force to the USB cable attachment when it is
Please call 1-800-822-8837 for information on how to
attached to the portable charger.
recycle this battery.
How to use the USB cable
Overview
■ Portable Charger
<QE-PL202>
LED indicator
Lights during charging and outputting
(see "LED Indicator" on page 6).
USB micro-B plug
Charging
Qi logo
Indicates compatibility with wireless
charging.
Do not overcharge this device.
USB micro-B input terminal (DC IN)
The illustrations show QE-PL202 as an example.
To charge from a computer
Power button (indicates battery level)
Turns on/off power.
If pressed with no device connected,
the remaining battery level is displayed
for approximately 10 minutes (see "LED
Indicator" on page 6).
USB A output terminal (x2) (DC OUT)
<QE-PL102>
LED indicator
Connect the USB micro-B plug of the included USB
Lights during charging and outputting
cable attachment to the USB micro-B input terminal
(see "LED Indicator" on page 6).
of the portable charger.
Connect the USB A plug to the USB terminal of
Qi logo
an active computer. The LED indicator lights and
Indicates compatibility with wireless
charging starts.
charging.
If other devices are connected to the other USB A output terminals
USB micro-B input terminal (DC IN)
of the computer during charging. Then the current necessary for
longer charging time or inability of charging.
The LED indicator turns off when charging is
Power button (indicates battery level)
completed.
Turns on/off power.
Estimated charging time:
If pressed with no device connected,
<QE-PL202> Approx. 12 hours
the remaining battery level is displayed
<QE-PL102> Approx. 6 hours
for approximately 10 minutes (see "LED
Disconnect the cable after charging.
Indicator" on page 6).
USB A output terminal (DC OUT)
<USB Cable Attachment>
These are special items for the product. Do not use them for other
devices.
USB micro-B plug
USB A plug
3
4
To charge with a wireless charging pad
LED Indicator
Put the portable charger on the charging area of
<Charging>
the wireless charging pad with Qi logo.
Indication
Color
State
Remaining battery
Face the side of the button upward.
Red
Charging
Approx. 30% or less
Do not connect any cable to the USB A output terminal of the portable
charger during charging.
On
Orange
Charging
Approx. 30 - 60%
Green
Charging
Approx. 60% or more
The LED indicator
Power button
lights and charging
(Approx. 0.5
Red
Error (Contact your dealer.)
-
starts.
sec. intervals)
*
The LED indicator
Off
-
Charging complete
100%
turns off when
* In some cases, charging may not be completed. → "Troubleshooting" on pages 6 to 7.
<Outputting>
charging is
Wireless
completed.
Charging Pad
Indication
Color
State
Remaining battery
LED indicator
Green
Supplying Power
Approx. 60 - 100%
Estimated charging time:
<QE-PL202> Approx. 10 hours
On
Orange
Supplying Power
Approx. 30 - 60%
<QE-PL102> Approx. 5 hours
Red
Supplying Power
Approx. 30% or less
No output (power supply is
*
Off
-
-
stopped)
* The product may be broken. → See "Troubleshooting" on pages 6 to 7.
<Indicating battery level>
How to supply power to a device
Indication
Color
State
Remaining battery
Green
Charging almost complete
Approx. 60 - 100%
The illustration shows QE-PL202 as an example.
On
Orange
Usable
Approx. 30 - 60%
Red
Needs charging
Approx. 30% or less
Troubleshooting
Press
Check the items of the table below.
Symptoms
Causes
Corrective actions
The wireless charging pad
does not work.
See the owner's manual of
the wireless charging pad.
LED indicator
The charging pad does not
recognize the device.
USB A output
Leave the portable charger
terminal
The temperature of the
at the temperature between
Cannot charge
portable charger is too high
41°F(5°C) and 95°F(35°C) for
Connect the USB micro-B plug to the terminal of
(via wireless
or too low.
a while and then charge it.
charging pad)
the device to be used.
When the battery is not used
Or use the USB cable that comes with your device.
for a long time, the portable
Try charging with the USB
charger cannot be charged
Connect the USB A plug to the USB A output
with a wireless charging pad.
terminal of the portable charger.
The portable charger is
Charge after supplying power
supplying power to a device.
ends.
Press the power button.
The computer is not on.
Start the computer.
The LED indicator comes on when charging
in
(see "LED Indicator" on page 6).
The computer is in standby mode. Exit standby mode. (*1)
When the device is charged, the LED indicator
Other devices are connected to the
Do not connect other devices
computer's other USB terminals,
to the computer's other USB
goes off.
resulting in an electric shortage.
terminals.
Cannot charge
(via computer)
The USB cable used is not
Use the included USB cable
for the USB A output terminal of the product. In that case, the
applicable.
attachment.
overcurrent protection function may work resulting in the following
The connection terminal is dirty
Replace the USB cable
status.
or deformed (connection failure).
attachment.
· Status: Although there is enough remaining battery, the LED
indicator lights red and does not turn off even if the
The portable charger is
Charge after supplying power
power button is pressed.
supplying power to a device.
ends.
Some of the devices which communicate with a computer via the
Room temperature that is too
USB cable may not be used during charging.
Charge between 41°F (5°C)
high or low might result in a
and 95°F (35°C)
The portable charger cannot be charged while supplying power.
longer charging time.
The QE-PL202: total output current 1.5 A simultaneous use of two
The computer has entered
standby mode during charging
Exit standby mode. (*1)
Charging takes
It is normal that the LED indicator of some devices to be used
via the USB terminal.
long (compared
and that of the portable charger do not go off at the same time.
Other devices are connected to
Connect the product directly
Charging is complete when the charge indicator of the device to
charging time)
the USB terminals of charging
to the USB terminal of
be used goes off.
device such as a computer,
charging computer.
The device used may not be fully charged depending on the
or the product is connected
Do not connect other devices
battery capacity of the device and portable charger. Also, the LED
via a USB hub or any other
to the same computer.
indicator of the portable charger and the device turns off if the
connection cable than included
Use the included USB cable
portable charger battery dies or charging ends.
USB cable attachment.
attachment.
The device charging is able to be operated while it is using the
The portable
It gets warm while a connected
This is normal. Disconnect
portable charger, but the remaining battery may become low and
charger gets
device is being used or during
and let cool before charging
the battery of the mobile device may not be charged.
warm
and just after charging.
again.
Noise interference
A radio or TV is in nearby
Keep 3 feet (1 m) or more
with TV and radio
area of the product.
away while charging.
5
6
<Charging/outputting time (reference)>
Symptoms
Causes
Corrective actions
Model
QE-PL202
QE-PL102
Use a compatible USB cable
Wireless
Approx. 10 h
Approx. 5 h
The USB cable used is not
with the device to be used
compatible.
(see the owner's manual of
No output from
the device).
USB input
Approx. 12 h
Approx. 6 h
the portable
The battery is completely
Charge the battery until it is
charger
discharged.
complete.
The power button was not
Press the power button
1 port output
Approx. 5 h
Approx. 3 h
pressed.
before use.
Although there is
enough remaining
2 ports output
Approx. 2.5 h
-
battery, the LED
indicator lights
Charge for one to two
red and does not
The charging time above is a guide for the portable charger time to become
go off even if the
minutes with the USB A
completely charged.
output terminal of a computer
Power button is
The charging time and usage above may change depending on the room's
The overcurrent protection
or other devices. If the same
pressed.
temperature and the use and storage of the unit.
function is activated.
status is frequently repeated
The "USB input" charging time above indicates when the included USB cable
Although there
with the mobile devices (e.g.,
attachment is used.
is enough
USB fan), do not supply
The outputting time above is a guide value of when the fully charged portable
remaining
power to it.
charger is output at DC 5 V, 500 mA.
battery, the
LED indicator
changes from
UL Wording
green to red.
Operation time
Charge the battery until it is
IMPORTANT SAFETY INSTRUCTIONS-Save These
of the portable
The battery is low.
complete.
charger is short.
Instructions
CAUTION - Risk of Fire and Burns. Do Not Open, Crush, Heat
(*1) See the owner's manual of the computer to exit standby mode.
Above 60°C or Incinerate. Follow Manufacturer's Instructions.
(*2) The battery life depends on the use conditions. Note that the internal battery
cannot be replaced.
FCC Wording
This device complies with Part 15 of the FCC Rules.
Model
QE-PL202
QE-PL102
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
Nominal
(2) this device must accept any interference received, including
charging
0.5 A (USB) / 1.0 A (AC Adaptor)* / 0.55 A (Wireless)
interference that may cause undesired operation.
current
Nominal
This device complies with Part 18 of the FCC Rules.
charging
5 Vdc (USB)
Responsible Party: Panasonic Corporation of North America Two
voltage
Riverfront Plaza Newark, NJ 07102-5490
Maximum
Support Contact: Panasonic Consumer Electronics Company
charging
0.5 A (USB) / 1.1 A (AC Adaptor)* / 0.65 A (Wireless)
Telephone No.:1-201-348-7000
current
Note:
Maximum
This equipment generates, uses, and can radiate radio frequency
charging
5.25 Vdc
energy and, if not installed and used in accordance with the
voltage
instructions, may cause harmful interference to radio communications.
Rated input
DC 5 V 1 A
However, there is no guarantee that interference will not occur in a
particular installation.
DC 5 V 1.5 A
Rated output
DC 5 V 1 A/1 port
If this equipment does cause harmful interference to radio or television
(total for 2 ports)/2 ports
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
Approx. 2-1/2 in (64 mm) x
Approx. 1-5/8 in (40 mm) x
Dimensions
more of the following measures:
2-3/4 in (70 mm) x 1 in (24 mm)
2-3/4 in (70 mm) x 1 in (24 mm)
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
Weight
Approx. 5-1/8 oz (145 g)
Approx. 2-7/8 oz (80 g)
• Connect the equipment into an outlet on a circuit different from that
to which the receiver in connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operating
Charge between 41°F (5°C) and 95°F (35°C)
temperature
ICES Wording
Lithium ion battery 3.7 V
Lithium ion battery 3.7 V
Internal battery
5300 mAh
2650 mAh
This ISM device complies with Canadian ICES-001 and ICES-003.
Approx. 2-1/2 in (64 mm) x
Approx. 1-5/8 in (40 mm) x
Cet appareil ISM est conforme à la norme NMB-001 du Canada.
Dimensions
3-1/2 in (90 mm) x 1 in (24 mm)
3-1/2 in (90 mm) x 1 in (24 mm)
CANICES-3(B)/NMB-3(B)Energy Regulation Wording
Weight
Approx. 5-7/8 oz (165 g)
Approx. 3-3/8 oz (95 g)
Energy Regulation Wording
Cable
Approx. 4 in (10 cm)
Approx. 3-3/8 in (8.5 cm)
length
This Portable Charger (QE-PL102,QE-PL202) is compliance
* As of April 2014, the dedicated AC adaptor is not available in the market.
Regulations. (Battery Charging Systems)
7
8
Accessory Purchases (United States and Puerto Rico)
Panasonic Products Limited Warranty
Limited Warranty Coverage (For USA and Puerto Rico Only)
Purchase Parts, Accessories and Owner's Manual online for
If your product does not work properly because of a defect in materials or
all Panasonic Products by visiting our Web Site at:
workmanship, Panasonic Corporation of North America (referred to as "the
warrantor") will, for the length of the period indicated on the chart below, which
http://www.pstc.panasonic.com
starts with the date of original purchase ("warranty period"), at its option either
Or, send your request by E-mail to:
(a) repair your product with new or refurbished parts, (b) replace it with a new or
npcparts@us.panasonic.com
a refurbished equivalent value product, or (c) refund your purchase price. The
decision to repair, replace or refund will be made by the warrantor.
You may also contact us directly at:
1-800-237-9080 (Fax Only)
Product or Part Name
Parts
Labor
(Monday-Friday 9am-9pm EST)
Portable Charger
1 year
Not Applicable
Panasonic National Parts Center
During the "Labor" warranty period there will be no charge for labor. During the
20421 84th Avenue South, Kent, WA 98032
"Parts" warranty period, there will be no charge for parts. This Limited Warranty
excludes both parts and labor for non-rechargeable batteries, antennas, and
(We accept Visa, MasterCard, Discover Card, and American
cosmetic parts (cabinet).This warranty only applies to products purchased and
Express.)
serviced in the United States or Puerto Rico. This warranty is extended only to the
original purchaser of a new product which was not sold "as is".
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
Mail-In Service
--Online
Online Repair Request
To submit a new repair request and for quick repair status visit our Web Site at
www.panasonic.com/repair.
As of Aug/2013
When shipping the unit, carefully pack, include all accessories, and send it prepaid,
adequately insured and preferably in the original carton. When shipping Lithium
Ion batteries please visit our Web Site at www.panasonic.com/BatteryHandling
as Panasonic is committed to providing the most up to date information. Include
a letter detailing the complaint, a return address and provide a daytime phone
number where you can be reached. A valid registered receipt is required under the
Limited Warranty.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER
WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE
INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF
PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT
RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Limited Warranty Limits And Exclusions
This warranty ONLY COVERS failures due to defects in materials or workmanship,
and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty
ALSO DOES NOT COVER damages which occurred in shipment, or failures which
are caused by products not supplied by the warrantor, or failures which result from
accidents, misuse, abuse, neglect, mishandling, misapplication, alteration, faulty
installation, set-up adjustments, misadjustment of consumer controls, improper
ntroduction of sand,
urant, or other business
or rental use of the product, or service by anyone other than a Factory Service Center
or other Authorized Servicer, or damage that is attributable to acts of God.
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER
"LIMITED WARRANTY COVERAGE".
THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING
OUT OF ANY BREACH OF THIS WARRANTY.
(As examples, this excludes damages for lost time, travel to and from the servicer,
loss of or damage to media or images, data or other memory or recorded content.
The items listed are not exclusive, but for illustration only.)
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the exclusions
may not apply to you.
which vary from state to state. If a problem with this product develops during or
after the warranty period, you may contact your dealer or Service Center. If the
problem is not handled to your satisfaction, then write to the warrantor's Consumer
Affairs Department at the addresses listed for the warrantor.
PARTS AND SERIVCE, WHICH ARE NOT COVERED BY THIS LIMITED
WARRANTY, ARE YOUR RESPONSIBILITY.
Customer Services Directory (United States and Puerto Rico)
Obtain Product Information and Operating Assistance; locate
your nearest Dealer or Service Center; purchase Parts and
Accessories; or make Customer Service and Literature
requests by visiting our Web Site at:
http://www.panasonic.com/help
or, contact us via the web at:
http://www.panasonic.com/contactinfo
For hearing or speech impaired TTY users, TTY: 1-866-605-1277
9
10
Advertisement
