Access Control Screen - HP UPS Network Module User Manual

Enter a custom name for the UPS in the System Name field. This name appears throughout the interface
3.
and is included in SNMP traps. Use a unique name for each UPS.
Select the display language of the web interface in the Default Language pull-down menu. Available
4.
options are English, Japanese, or Auto. Select Auto to allow the interface to display the language
configured for the web browser. Refresh the browser window for changes to take effect.
Enter the time interval for UPS data collection in the History log interval (sec) field. The interval can be
5.
between 5 and 99999 seconds. By default, UPS data is collected every 60 seconds.
Click Save.
6.
To perform a remote reboot of the UPS Network Module without modifying the configuration, click Reset
Communication. This action is required to enable any changes made on the Network Settings screen (on
page 32).
To restore all UPS Network Module parameters to the default configuration, click Factory Reset. The UPS
Network Module communication will be lost. To maintain communication, select the Keep TCP/IP parameters
checkbox, and then click Factory Reset. The configured IP address, subnet mask, gateway, and
BOOTP/DHCP parameters are not reset.
Click Help to view online help.
For a summary of the default configuration, see "Default parameters (on page 73)."

Access Control screen

Click Access Control in the menu tree to display the Access Control screen. This screen allows an
administrator to configure secure access to the UPS Network Module through a web browser.
To configure the administrator account that provides secure access and enables modification of
configuration settings and log files:
Enter a new user name in the New Manager User Name field. This text field is limited to 10 characters.
1.
The default user name is admin.
HP UPS Network Module web interface 31