English
STOPPING THE GENERATOR
1. Turn off the power switch of the electric equipment or unplug the cord from
receptacle of the generator.
2. Allow the engine about 3 minutes to cool down at no-load before stopping.
3. Set the engine switch to "OFF/ " position.
4. Close ("CLOSE"/ "C") the fuel cock.
OIL SENSOR
● The oil sensor detects the fall in oil in the crankcase and automatically stops the engine when the oil level
fails down below the safety limit.
● When engine has stopped automatically, check the oil level.
● If the engine does not start by usual starting procedures, check the oil level.
● Run
RECOMMENDED OIL LEVEL
OIL LEVEL
FLOAT SWITCH
12
OFF
Fig. 27
E24SC
Fig. 23
E24SC
CLOSE
CLOSE
Fig. 25
● Stop
Oil Level
OIL LEVEL
ON
Fig. 22
E42SC, E62SC
Fig. 24
E42SC, E62SC
CLOSE
CLOSE
Fig. 26
Fig. 28