LG PQCSW320A0E Quick Manual page 24

About AC Smart
Temperature limit condition setting
<Temperature limit operating
condition setting screen>
Refer to the following table for the description on the items to set the Temperature limit operation.
Item
Upper limit temperature
Lower limit temperature
Temperature
criteria
Apply/Not apply
24
AC Smart
When you press the [Condition setting] button, the
'Condition setting' screen to set the Temperature limit
operation function and related items will be displayed as
shown in the left picture.
Designate the Temperature limit operation group and set
the item for Temperature limit operation, and then press
the [Save] button to set the Temperature limit operation
function to the applicable group.
Set the maximum temperature permitted as indoor temperature.
Set the minimum temperature permitted as indoor temperature.
Select the method to measure the indoor temperature. You can select
one of the two methods to measure the indoor temperature.
- Average all units: Method of operating the Temperature limit
operation function by using the average of the temperature from
indoor units detected within the group
- Fixed: Method of operating the Temperature limit operation function
according to the temperature detected based on the criteria of the
indoor unit registered first within the group
Set whether to execute or not execute the Temperature limit
operation.
- Apply: Execute the Temperature limit operation function
- Not apply: Not execute the Temperature limit operation function
Description