5)
Click [Start] on the Genesis ISP Utility window of PC to start installing new SCALER fi rmware.
6)
Check that the new SCALER fi rmware has been installed.
7)
Unplug the AC power cord from TV. Wait for about 5 seconds and connect the AC power cord
again.
3-2-4. Checking after Upgrading of SCALER Firmware.
S
et TV to service mo
The TV goes into service mode. Check that the SCALER fi rmware version is upgraded.
de.
- 32 -
Click [Start] to install new
SCALER fi rmware
Upon completion of the installation, "ISP
successful" appears in "Status" of Run ISP
Upgraded SCALER fi rmware version