Toshiba e-STUDIO163 Service Handbook page 129

[B] Adjustment
(1) Close the ADF.
(2) Adjust it by turning the adjustment screws on the hinges.
• Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
ADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
• Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
ADF.
Turn it clockwis .................... Lowered
Turn it counterclockwise ...... Heightened
© December 2005 TOSHIBA TEC
Fig. 3-51
Fig. 3-52
3 - 51
e-STUDIO163/203 ADJUSTMENT
3