Carephone 62
4.6
Take the first incoming call
If your Carephone 62 is delivered to you unprogrammed, this
special function allows you to accept the first incoming call.
If the first incoming call is from your monitoring centre, the
operator can start a remote programming session. See
Section Remote programming from a monitoring centre, Page 18.
NOTICE!
When pressing these 3 buttons, English is set as the default
language. See Section 6.2.4 Programming steps, Page 20.
4.7
Device acknowledgments
4.7.1
Light signals
The Carephone 62 has four indicator lamps that display the
status of the unit. The symbols have the following meaning:
Bosch Security Systems
Press buttons <Yellow> <Green> <Grey> together for at
least two seconds.
Lamp shines bright
Lamp shines dull
Lamp blinks (0.5 s)
Lamp blinks fast (0.5 s)
Lamp flashes (0.1 s)
User Manual
Product Description | en
F.01U.141.162 | V5 | 2014.09
11