Section 6 - Wi-Fi Hot Spot Mode
This section will allow you to change the local network settings of the DIR-505 and to configure the DHCP settings. After making
your changes, click the Save.Settings button.
Device Name:
Enter the Device Name of the DIR-505. It is recommended
that you change the Device Name if there is more than one
D-Link device in your subnet.
Dynamic IP
Here, you can edit the IP.Address, Subnet.Mask, and Local.
Domain.Name.for the DIR-505 to use.
(DHCP) LAN
Connection
Type:
Ticking the Enable. DHCP. Server. checkbox allows the
DHCP Server
Settings:
DIR-505 to assign IP addresses to the devices on your
network. by using DHCP. You can set the range of allowable IP
addresses using the DHCP.IP.Address.Range.text boxes, and
you can set the DHCP.Lease.Time with the corresponding
text box.
D-Link DIR-505 User Manual
LAN Setup
121