Copy To Lcd Remote Keypad - Toshiba RKP004Z Instruction Manual

8. 1 Copy to LCD Remote Keypad

Push the Function F3 key on an initial screen and the copy mode screen is displayed. It is
not possible to drive with the [RUN] key in the following 3～5 screen display.
1
Select the memory saving group using the
control dial.
2
Select copy direction [Copy to the LCD
memory] using the control dial.
3
Display of copy waiting
Copy starts when the function [4] key is input.
4
Display of copy loading（fixed screen）
Copy finishes in 1 minute. When the copy
is not completed even if it waits 2 minutes
or more, please reset a power supply and
copy again.
Note) The status display（ ）doesn't rotate when
copying it while driving until the copy is completed.
5
Display of copy finish
Return to the copy direction window
as above "2" when press the ESC key
after copy.
8. Operation by a copy function
Top
Top
Please push F4 key
when starting
Top
N o w l o a d i n g .
P l e a s e w a i t f o r a b o u t 1 m i n .
［LCD メモリへコピー］
C o p y w a s c o m p l e t e d n o r m a l l y.
Please push ESC-key.
CRC code：6AE3
Top
8-2
Copy Mode
Group selection
Memory - A
Memory - B
Copy Mode
Memory - A
Copy direction
［Copy to the inverter］
［Copy to the LCD memory］
Copy Mode
Memory - A
［Copy to the LCD memory］
Waiting
［LCD メモリへコピー］
Copy Mode
Memory - A
［Copy to the LCD memory］
Loading
Copy Mode
Memory - A
［Copy to the LCD memory］
Finish
Info
Start
F4