Setting Up Your Meter - Setting The Date, Time And Volume - GE GE200 User Manual

Setting Up Your Meter - Setting the Date, Time and Volume

You can enter the Setting Mode two ways.
1. Replace the Battery
After removing the battery, press the main button several times until there is no signal on screen, then follow the
battery installation steps to replace battery. The GE200 Blood Glucose Meter will perform a self-test. Press the
main button to exit the self-test and enter the Setting Mode.
2. With Battery Inserted
Press the main button to turn on the GE200 Blood Glucose Meter. Hold down the main button for 7 seconds. During
this time the screen will go blank until you hear a beep. After the beep, the meter will turn on into the Setting
Mode. The display screen will show setting data.
NOTE
- Use the Left and Right buttons to select your setting data and press the main button to confirm each
selection. After confirming all of the settings, you will return to the Time Mode.
18
Setting Up Your Meter - Setting the Date, Time and Volume
1. Year setting
With the year format blinking , press the Left or Right button until you see the current year.
Press the Main button to confirm. Once the year is confirmed, the Month Setting will appear.
2. Month setting
With the month blinking, press the Left or Right button until you see the current month. Press
the Main button to confirm. Once the month is confirmed, the Day Setting will appear.
3. Day setting
With the day blinking, press the Left or Right button until you see the current day. Press the
Main button to confirm. Once the day is confirmed, the Time Setting will appear.
1)
2)
3)
19