4.2 Disassembling the SL10
Caution!
Inside the telephone there are three flexible cables, which are very sensitive to any kind of
mechanical damage. Please be careful during all the disassembling process not to damage
them e.g. by bending or snapping.
4.2.1 Necessary tools
For disassembling the SL10 the following tools are
mandatory:
- Metal blade
- Catch lever
- Screwdriver Torx 6
- Tweezer
4.2.2 Disassembling the Mobile
1. Remove battery and SIM-Card
2. Unscrew antenna.
1. Remove the two countersunk-head screws at the lower end of the telephone (below vent
plug) and inside the battery department.
2. Move slide all the way to the open position.
3. Undo the slide stop by inserting the metal strip on the left side
between the slide and the base.
Service Manual SL10
Sm_sl10_lvl2_v11.doc
Private Communication Systems
V1.1
Page 6 of 22
Mobile Phones
PN MP ST
R. Fleuren
05/98