Install the CV31 Ignition Sensing
Cable (Optional)
Install the CV31 ignition sensing cable to automatically turn
on the CV31 when the operator turns on the vehicle.
1 Connect the ignition (blue) wire to the ignition circuitry of
2 Connect the grounding (black) wire to the vehicle chassis
3 Connect adapter cable P/N VE027-8024-C0 to the
6
Universal Vehicle Power Supply Installation Instructions
the vehicle (up to 60 V).
for electrostatic discharge (ESD) protection. If the vehicle
chassis is not a suitable ground, connect the wire to the
negative terminal of the power source.
ignition sensing cable, and then connect the ignition
sensing cable to the CV31.