1. Manuals
  2. Brands
  3. Miele Manuals
  4. Vacuum Cleaner
  5. HS15
  6. Operating instructions manual

Miele HS15 Operating Instructions Manual

Hide thumbs Also See for HS15:
Table of Contents

Advertisement

Quick Links

See also: Operating Instructions , Operating Instructions Manual

Operating instructions

Vacuum cleaners
To avoid the risk of accidents or damage
to the appliance, it is essential to read these
instructions before using it for the first time.
en - GB
These operating instructions apply to
HS15
standard models S 8530 and S 8590
as well as to other models which are
distinguished by names rather than numbers.
M.-Nr. 09 246 030

Advertisement

Table of Contents
loading

Related Manuals for Miele HS15

Summary of Contents for Miele HS15

  • Page 1: Operating Instructions

    - GB These operating instructions apply to HS15 standard models S 8530 and S 8590 as well as to other models which are distinguished by names rather than numbers.

  • Page 2: Table Of Contents

    Contents Caring for our environment Guide to the appliance Warning and Safety instructions Preparing for use Using the accessories supplied Correct use Mains cable ............15 Switching on and off .

  • Page 3: Caring For Our Environment

    Caring for our environment Disposal of packing material Disposing of your old appliance The packaging is designed to protect the vacuum cleaner from damage Before disposing of your old appliance during transportation. The packaging remove the dustbag and all the filters materials used are selected from and dispose of them with your normal materials which are environmentally...

  • Page 4: Guide To The Appliance

    Guide to the appliance...
  • Page 5 Active HEPA filter k Illuminated parking attachment (on both sides of the vacuum cleaner) l Dust compartment filter (for motor protection) m Electrobrush socket cover holder n Original Miele dustbag o Carrying handle p AllTeQ or AirTeQ floorhead q Release button...

  • Page 6: Warning And Safety Instructions

    Warning and Safety instructions This vacuum cleaner meets statutory safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the vacuum cleaner, please read these instructions carefully before using it for the first time.
  • Page 7 Otherwise the guarantee will be invalidated. The socket on the vacuum cleaner (depending on model) must only be used for the Miele Electrobrush specified for use with this appliance. Do not pull or carry the vacuum cleaner by the cable and be careful not to damage the cable when withdrawing the cable from the socket.
  • Page 8 Do not let the vacuum cleaner get wet. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply. Repairs should only be carried out by a Miele authorised service technician. Repairs and other work by unqualified persons could be dangerous.
  • Page 9 Do not vacuum toner dust. Toner, such as that used in printers and photocopiers, can conduct electricity. Accessories To avoid the risk of injury when vacuuming with a Miele Electrobrush or Turbobrush, do not touch the rotating roller brush. The Miele Electrobrush is a motor driven accessory for use only with Miele vacuum cleaners.

  • Page 10: Preparing For Use

    Preparing for use Attaching the suction hose ^ Insert the hose connector into the socket until it clicks into position. To do this, line up the guides on the two pieces. Removing the suction hose from the cleaner ^ Press the release buttons at the side of the hose connector, and lift the hose from the socket.
  • Page 11 It can also be used with the brush protruding to vacuum hard flooring. For hard flooring, such as stone and parquet, we recommend using one of the special Miele floor brushes (see "Optional accessories").
  • Page 12 Preparing for use Adjusting the standard floorhead Please observe the flooring manufacturer's cleaning and care instructions. Vacuum carpets and rugs with the brush retracted: ^ Press the foot control %. Clean hard flooring which is not susceptible to scratching with the brush protruding: ^ Press the foot control ).
  • Page 13 Preparing for use Inserting batteries into the LED handle a Loosen the screws on the cover. b Press down on both sides of the cover to remove. c Take out the battery holder and insert the three batteries supplied making sure they are the right way round.

  • Page 14: Using The Accessories Supplied

    Using the accessories supplied a Crevice nozzle For cleaning in folds, crevices or corners. b Natural bristle dusting brush For dusting shelves, ornate or carved items or delicate objects. The head of the dusting brush can be swivelled to attain the best cleaning position.

  • Page 15: Correct Use

    Correct use Mains cable Unwinding the cable ^ Pull the mains cable out to the required length (max. approx. 7.5 m). ^ Insert the plug in the socket correctly. The parking system lighting on both sides switches on. The first time the vacuum cleaner is used, the lighting switches on after approx.

  • Page 16: Adjusting The Suction Power

    Correct use Adjusting the suction power The suction power can be regulated to suit the type of flooring being cleaned. Reducing the suction power reduces the amount of effort required to manoeuvre the floorhead. Some models also have symbols on the controls.
  • Page 17 Correct use The first time the vacuum cleaner is switched on, the "Auto" power setting will be selected automatically. ^ Press the + foot control to select a higher setting. ^ Press the - foot control to select a lower setting. After that, the vacuum cleaner will switch on at the setting which was used previously.

  • Page 18: Illuminating The Working Area

    Correct use Vacuuming ^ When vacuuming, pull the cleaner behind you on its wheels. You can stand it upright for vacuuming stairs and curtains etc. Warning: When vacuuming especially fine dust, e.g. sawdust, sand, plaster, flour, talcum powder etc., electrostatic charges build up naturally.

  • Page 19: Setting Down, Transportation And Storage

    Setting down, transportation and storage Parking system for pauses in vacuuming (cannot be used with the SEB 234 L Electro Premium Electrobrush) A parking system has been designed for conveniently parking the suction tube and floorhead during pauses. ^ Slot the floorhead into the parking attachment at the back of the vacuum cleaner.

  • Page 20: Parking System For Storage

    Setting down, transportation and storage Parking system for storage Always disconnect the vacuum cleaner from the electrical supply when you have finished using it. Switch off at the wall socket and unplug it. After approx. 30 seconds the parking system lighting switches off. ^ Stand the vacuum cleaner upright when it is not being used and when it is being stored.

  • Page 21: Maintenance And Care

    Using any other protection) dustbags will damage the vacuum – Exhaust filter cleaner. Original Miele dustbags are identified by the "Original Miele" logo on Only use genuine dustbags, filters, the packaging or directly on the accessories and optional dustbag.

  • Page 22: When To Change The Dustbag

    (see possible reasons for this below). Miele dustbags are disposable and designed to be used only once. Dispose of the dustbag when it is full. Do not attempt to reuse them as suction would be reduced.

  • Page 23: Replacing The Dustbag

    Maintenance and care Replacing the dustbag ^ Press the release button for the dust compartment lid and raise the lid as far as it will go. The dustbag has a closing flap which closes automatically when the dust compartment lid is raised to prevent any dust escaping.

  • Page 24: When To Change The Dust Compartment Filter (For Motor Protection)

    Replace this filter every time you start a new packet of dustbags. A dust compartment filter is supplied with every packet of Miele dustbags. How to change the dust compartment filter ^ Open the dust compartment lid. ^ Pull the dustbag out by the grip next to the self-closing flap on the collar.

  • Page 25: Replacing The Active Hepa Filter

    You can replace the Active HEPA exhaust filter fitted in the vacuum cleaner with one of the other Miele exhaust filters if you wish (see "Optional accessories").

  • Page 26: Replacing The Active Hepa Exhaust Filter

    Maintenance and care Replacing the Active HEPA exhaust filter Do not use more than one exhaust filter at a time. ^ Open the dust compartment lid. ^ Raise the filter and remove it. ^ Replace with a new filter, and push it down into place.

  • Page 27: Replacing One Type Of Exhaust Filter With Another

    Air Clean filter is being used, as long as it is replaced every time a new packet of Miele dustbags is started. The indicator light will go out when the reset button is pressed.

  • Page 28: Changing The Batteries On The Led Handle

    Maintenance and care Changing the batteries on the LED handle You will need three 1.5 V (AAA) batteries. a Loosen the screws on the cover. b Press down on both sides of the cover to remove. c Take out the battery holder and change the three batteries, making sure they are the right way round.

  • Page 29: When To Change The Thread Lifters

    Press the bearing out, and remove it. c Take out the roller. ^ Remove any threads and hair, replace the roller and refit the bearing. Replacement parts are available from your Miele dealer or from Miele (see back cover for contact details).

  • Page 30: Cleaning And Care

    Cleaning and care Always disconnect the vacuum cleaner from the electrical supply before cleaning it. Switch off at the wall socket and unplug it. Vacuum cleaners with textile velvet finish Clean the vacuum cleaner casing with the dusting brush or a slightly damp cloth.

  • Page 31: Problem Solving Guide

    Problem solving guide The vacuum cleaner switches off automatically. The overheating warning light § also comes on. A temperature limiter switches the vacuum cleaner off automatically if it gets too hot. The overheating warning light § will then come on to indicate that it has overheated.

  • Page 32: After Sales Service

    After sales service In the event of a fault that you cannot easily remedy, please contact – your Miele Dealer – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only).

  • Page 33: Optional Accessories

    A number of additional accessories and hygienic cleaning of all floor surfaces. floorheads are available to order for The level of cleanliness of the floor your vacuum cleaner via your Miele shows in a colour "traffic light" display Dealer, Miele or online at: when vacuuming.
  • Page 34 Optional accessories Other accessories Crevice nozzle, 560 mm (SFD 20) Flexible crevice nozzle for accessing MicroSet (SMC 20) awkward to reach areas. This set is specially designed for cleaning small objects and difficult to Upholstery nozzle, 190 mm (SPD 10) reach areas (such as PC keyboards, For cleaning upholstery, mattresses, stereo equipment, intricately carved...

  • Page 35: Electrical Connection For The Uk

    Electrical connection for the UK All electrical work should be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations (BS 7671 in the UK). The voltage and frequency are given on the data plate located underneath the vacuum cleaner.
  • Page 36 Alteration rights reserved / UniQ / 1912 M.-Nr. 09 246 030 / 01...

This manual is also suitable for:

S 8530S 8590

Table of Contents