Epson Runsense SF-810 User Manual page 60

SF-810 User Manual
F
Set the range for maintaining your
target pace.
Use C/D to set, and then press A.
Hold down C/D to speed through the numbers.
An alarm sounds if you are outside the set pace
range.
G
Complete the settings.
Hold down A.
The measurement screen is displayed.
Note:
If you want to turn off the alarm that notifies you when
you are falling behind the set pace range, select OFF in
step 6.OFF is the bottom line for the Pace Range (under
0'05").
Measure
60