System Setup Screen-3
J
K
I
Adjusting the Navigation Sound Level
If the guide etc., sound from the navigation
system interrupts, the sound level can be
adjust.
Touch [ 3 ] to increase the level.
Touch [ 2 ] to decrease the level.
NOTE
This function available when the KENWOOD
navigation unit is connected.
J
Setting the On Screen Display Function
Each time you touch [ On Screen ], the mode
switches as follows:
" Auto "
When a button on the main unit or remote control
unit is pressed, or the disc track is changed, the
information is temporarily superimposed on the
picture.
" Manual "
When the lower centre of the screen is touched
whilst a TV/video picture is displayed, the
information is temporarily superimposed on the
picture.
K
Setting the Information on the Graphic
Screen
You can set whether or not to display the
information on the graphic screen.
Each time you touch [ Drive Info ], the mode
switches as follows:
" ON "
Information function is on
" OFF "
Information function is off
M
Demonstration Function
Each time you touch [ DEMO ], the mode
switches as follows:
" ON "
The graphic screen's background mode switches
repeatedly.
" OFF "
the demonstration function is off.
L
M
L
Selecting the Point Marker Type
Each time you touch [ Marker ], the mode
switches as follows:
" Type 1 "
" Type 2 "
" OFF "
No display the pointer marker.
13