Start Recording - Kenwood CD Player DP-SE7 Instruction Manual

Temporary stop during recording
8
÷ Press the record key to restart recording.
To interrupt recording
An unrecorded section of about 4 sec is produced
directly after the recording has been interrupted.
¶
÷ Recording pause condition is reached after approxi-
mately 4 sec.
input selector
4 4
Select an input source other than
"TAPE" input.
¶
5 5
8
¶
8
¶
¶
4. Select the source to be recorded.

5. Start recording.

1 Play (or tune) the input
source to be recorded.
2 Start recording.
An unrecorded section of about 4 sec is pro-
duced (auto recording mute)
1 Obtain stop condition.
2 Press the record key twice.
¶
÷ An unrecorded section of about 4 sec is produced and
recording pause condition is reached.
To end recording
The input source component to be recorded
should be displayed.
R-SE7
C D
÷ When the CD input is selected and if a disc has been set
in the CD player, its playback starts immediately.
Lights
÷ The recording level is adjusted automatically when the
CRLS function is used.
÷ Recording stops automatically when the tape side(s) to
be recorded have been fully recorded.
Recording
R-SE7/DP-SE7/X-SE7 (En)
About
4 sec
8
¶
¶
7
¶
º
29