Problem Solving Guide - Miele EGW 6210 Operating And Installation Instructions

Plate warming drawer
Hide thumbs Also See for EGW 6210:
Table of Contents

Advertisement

With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified person in strict accordance with current local and
national safety regulations. Repairs and other work by unqualified persons
could be dangerous. The manufacturer cannot be held liable for unauthorised
work.
Problem
The appliance does not heat
up.
The crockery is not warm
enough.
The crockery is too hot.
The On/Off switch does not
light up when the appliance
is switched on.
Possible cause
The appliance is not correctly
plugged in and switched on at
the mains socket.
The mains fuse has tripped.
The temperature setting is too
low.
The crockery has not been
allowed to heat up for a
sufficiently long time.
The temperature control is faulty.
The indicator light for the switch
is defective.

Problem solving guide

Remedy
Insert the plug and switch on at
the socket.
Reset the trip switch in the mains
fuse box (minimum fuse rating -
see data plate).
If, after resetting the trip switch in
the mains fuse box and switching
the appliance back on, the
appliance will still not heat up,
contact a qualified electrician or
the Miele Service Department.
Select a higher temperature.
Various factors will affect how
long the crockery will take to heat
up (see "Heating up times").
Switch the appliance off and call
an electrician or the Miele Service
Department.
Switch the appliance off and call
an electrician or the Miele Service
Department.
19

Advertisement

Table of Contents
loading

Table of Contents