Basic Operations; Tv Watching; Functions During Tv Screen; Functions When Displaying The Easy Control Panel - Kenwood CarPortal KOS-V1000 Instruction Manual

TV Watching

Various control screens appear in the TV Source mode. (You can only operate TV with the optional
accessory TV Tuner connected.)

Functions During TV Screen

Basic functions are available even when the TV
screen is displayed.
Display the TV screen
1
6
1 TV Band Number Display
2 TV Area Group Display
Refer to <TV Setup> (page 67).
3 Memory Number Display
4 Channel Number Display
5 Channel Up Area
Increase the channel.
Use the <Seek mode> (page 35) to change
the channel tuning sequence.
6 Channel Down Area
Decrease the channel.
Use the <Seek mode> (page 35) to change
the channel tuning sequence.
7 Band Switch Area
Switches to TV1 or TV2.
8 Information Display Button Area
⁄
• For TV picture selection and receiver button operations,
see <Basic operations> (page 10).
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
34 KOS-V1000
DISP
SRC V.SEL
ZOOM
MENU OUT IN POSITION
AUD
•
DVD
2 3
7
8
Functions When Displaying the Easy
Control Panel
Displays a floating control panel in the screen.
4
5
6
1
1 Switches the source.
2 Switches the TV band (to TV1 or TV2).
3 Select a channel.
Use the <Seek mode> (page 35) to change
the channel tuning sequence.
4 Switches the Seek mode.
(page 35 for the <Seek mode>)
5 Displays the Screen Control screen.
(page 48 for the <Screen Control>)
6 Displays the external device control screen.
See <External Device Power Supply
Control> (page 45).
⁄
• The Easy Control Panel display is hidden when you touch
a central area of the monitor.
NAVI
MODE/TOP MENU FNC/MENU/PBC AUDIO RETURN
ROUTEM CANCEL
VOICE
AV OUT OPEN SUBTITLE
VIEW MAP DIR
ANGLE
FM +
5
2 3 3 4