Names And Functions Of Parts - Kenwood 5.1 KRF-V7050D Instruction Manual

Names and functions of parts

6
Speaker indicator
CLIP indicator
MUTE indicator
STANDBY STANDBY
POWER
ON/STANDBY
POWER
ON/STANDBY
ON OFF
PHONES
For VR-507
1 POWER key (For KRF-V7050D)
Use to turn the main power ON/OFF.
2 ON/STANDBY (
) key
(For KRF-V7050D)
Use to switch the power ON/STANDBY when
the POWER is turned ON.
STANDBY indicator
2 POWER (
) key (For VR-507)
Use to turn the power ON/STANDBY.
STANDBY indicator
3 MULTI CONTROL knob
Use to control a variety of settings.
4 SET UP key
Use to select the speakers' settings etc.
5 Surround indicators
DTS indicator
Lights when the receiver is in the DTS mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby Digital
mode.
PRO LOGIC indicator
Lights when the receiver is in the PRO LOGIC
mode.
Standby mode
When standby indicator is lit, this receiver is in standby mode and consumes a small amount of curent for back-up. This system can be switched on using
remote controls.
Frequency display,
Input display,
Preset channel display,
Surround mode display
SP A B TI.VOL
L C R
CLIP MUTE
LFE SW
RDS EON PTY
SL S SR
TP TA NEWS
Speaker selection indicators
Input channel indicators
Output channel indicators
MULTI CONTROL
A SPEAKERS B
(
3 STEREO indicator
Lights when the receiver is in the 3 STEREO
(
mode.
CS 5.1 indicator
Lights when the receiver is in the CS 5.1 mode.
6 INPUT MODE key
Use to switch between the digital and analog
(
inputs.
7 DIMMER key
Use to adjust the brightness of the display.
(
Use to select the REC MODE.
8 MONITOR key
(
Use to monitor the source that is connected to
the MONITOR jack.
9 VOLUME CONTROL knob
0 PHONES jack
¶
Use for headphone listening.
! SPEAKERS A/B keys
¶
Use to turn the A/B speakers ON/OFF.
@ SOUND key
¶
Use to adjust the sound quality and the ambi-
ence effects.
AUTO SOUND indicator
Band indicators
DOWNMIX indicator
Display
DOLBY
DTS PRO LOGIC 3 STEREO CS 5.1 INPUT SELECTOR
DIGITAL
SET UP INPUT MODE DIMMER MONITOR
SOUND LISTEN MODE SOURCE DIRECT
BAND AUTO/CINEMA EQ. MEMORY
¶
¶
9
£º
™
¡
™
)
•
PRO LOGIC
indicator
DIGITAL indicator
S.DIRECT indicator
AUTO indicator
MEMO indicator
FM AUTO SOUND DIGITAL AUTO
AM PRO LOGIC S.DIRECT MEMO
ST. indicator
MHz 3 STEREO MONITOR ST.
kHz DOWNMIX DSP TUNED
TUNED indicator
MONITOR indicator
DSP indicator
3 STEREO indicator
STEREO indicator
VOLUME CONTROL
DOWN
S-VIDEO V AV AUX L – AUDIO – R
# BAND key
Use to select the broadcast band.
$ AUTO/CINEMA EQ. key
Use to change "TAPE" indication to "MD".
Use to select the auto tuning mode.
Use to switch the status of CINEMA EQ. ™
% LISTEN MODE key
Use to select the listening mode.
^ MEMORY key
Use to store radio stations in the preset memory.
& SOURCE DIRECT key
Use to pass the source material directly to the
amplifier.
* INPUT SELECTOR knob
Use to select the input sources.
( AV AUX (S VIDEO, V, AUDIO L/R) jacks
UP
£
)
£
¶
™
¢
¡
$