Copyright Information; Before Calling Service Personnel - Sony DVP-FX700 Service Manual

QQ
3 7 63 1515 0

Copyright Information

Region Management Information
Region Management Information: This DVD Player is designed and manufactured to respond to the
Region Management Information that is recorded on a DVD disc. If the Region number described on the
DVD disc does not correspond to the Region number of this DVD player, this DVD player cannot play that
disc.
The Region number of this DVD player is 1.
Note on Unauthorized Discs
You may not be able to play back some DVD video discs on this player if they were purchased from out-
side your geographic area or made for business purposes.
When you try to play back an unauthorized disc, "Check Regional Code" appears on the TV screen.
Note on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, and rent copyrighted
material without permission.
DVD video discs are copy protected, and any recordings made from these discs will be distorted.
This product incorporates copyright protection technology that is protected by U.S. patents and other intel-
lectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
TE
L 13942296513

Before Calling Service Personnel

Check the following guide for the possible cause of a problem before contacting service.
Symptom
No power.
The power is on, but
the DVD player does
not work.
No picture on the
LCD or TV (including
video from another
unit).
www
.
http://www.xiaoyu163.com
1
Symptoms and Correction
Cause
• The power cord is disconnected.
• Hold switch is set to HOLD position.
• The battery is discharged.
• No disc is inserted.
• The video cable is not connected
securely.
• The AV LINE SELECT Out switch is
not set correctly.
• LCD mode is set to OFF.
• Check that Brightness control is set to "–".
x ao u163
• The TV is not set to receive DVD sig-
y
nal output.
i
• The connected TV power is turned off.
http://www.xiaoyu163.com
2 9
8
Q Q
3 6 7 1 3
63
• Plug the power cord into the wall out-
let securely.
• Release the hold mode.
• Recharge the battery.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the display win-
dow is lit.)
• Connect the video cable into the jacks
securely.
• Set the LINE SELECT In/Out switch
correctly.
- While you are playing a disc, set the
LINE SELECT Out switch to Out
mode
- While you are viewing video from
other equipment, set the LINE
SELECT In/Out switch to In mode.
• Select a LCD mode other than OFF.
• Adjust the brightness.
• Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
.
screen.
• Turn on the TV.
64
1-30
9 4 2 8
1 5 0 5 8 2 9 9 4
Correction
m
co
9 9
2 8 9 9