Table of Contents
Advertisement
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
tilt the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press
to open the setup screen.
ENTER
4.
In the setup menu, select "Dynamic Range
Control" by tilting the joystick up or down and
press
.
ENTER
Digital Audio
7
PCM Down Conversion
7
Wide
Dolby Digital
7
Normal
DTS
7
Midnight
MPEG
Speaker Setting
Audio During Search
Dynamic Range Control
Audio Filter
5.
Select the level by tilting the joystick up or down,
then press
to enter the selection in memory.
ENTER
"Audio Filter" Setting
DVD AUDIO is recorded with a maximum sampling
rate of 192 kHz and theoretically capable of
reproducing up to 96 kHz. As a result, the speakers
used may be damaged if they are not compatible with
high frequencies. When an ordinary speaker system is
connected, set the "Audio Filter" setting to "Filter
1
60 kHz" to protect the speakers. When the speaker in
and
SET UP
use are compatible with high frequencies, set this
setting to "Filter 110 kHz". (For details, refer to the
instruction manuals provided with your speakers.)
At the factory, the player has been set to "Filter 60
kHz" to protect the speakers from damage.
Setting items
"
" : Select to return to the previous screen.
"Filter 60 kHz" : Select when the speakers in use
are not suitable for reproduction of high
frequencies.
"Filter 110 kHz" : Select when the speakers in use
are suitable for reproduction of high frequencies.
Chapter 2: Various Setups
Operation procedure
1.
Set the mode switch of the joystick remote to the
Purple position.
2.
While the player is in stop mode, press
tilt the joystick up or down to display the "SOUND"
menu of "SET UP MENU".
3.
Press
to open the setup screen.
ENTER
4.
In the setup menu, select "Audio Filter" by tilting
the joystick up or down and press
Digital Audio
7
PCM Down Conversion
7
Filter 60kHz
Dolby Digital
Filter 110kHz
7
DTS
MPEG
Speaker Setting
Audio During Search
Dynamic Range Control
Audio Filter
5.
Select "Filter 60 kHz" or "Filter 110 kHz" by tilting
the joystick up or down, then press
the selection in memory.
1
and
SET UP
.
ENTER
to enter
ENTER
33
Advertisement
Table of Contents
