Sharp Aquos LC-57D90U Operation Manual page 47

Useful adjustment settings
Press MENU and the MENU screen displays.
Press INPUT to select INPUT5.
DVI input signal setting
Press INPUT.
• A list of selectable sources appears.
l ~
<5
COLE
I.
OBltK
~r
VOL CH
SURROUND
j+)
(JMUTE
at::!
v
a
Selecting input source
Use this menu to select the input source.
Press INPUT again to select the input source.
• An image from the selected source
automatically displays.
• You can also select the in put source by
pressing
Ja/'•.
• If the corresponding input is not plugged in,
you cannot change the input. Be sure to
connect the equipment beforehand.
Selecting input signal type
For setting the signal type of external equipment
connected to INPUT 1 and INPUT 2 terminals.
Press MENU and the MENU screen displays.
Press .....
/~
to select "Option".
Press ..
IT
to select "Input Select", and then
press ENTER.
Press ..... /~ to select "Option".
Press ..
IT
to select "Input Select", and then
press ENTER.
Press ..
r"
to select the signal type you want
to set, and then press ENTER.
• If the selected signal type is incorrect, an image
does not display or no color image displays.
Press ..
IT
to select the equipment
connected to INPUT '5 terminal, and then
press ENTER.
Press MENU to exit.
Press MENU to exit.
• If you set INPUT1 and INPUT2 to Auto, the TV will
automatically select the input signal.
• Check the operation manual of the external equipment
for the signal type.
• Setting INPUT 1 and INPUT 2 signal selection to "Auto"
when other equipment is connected will result in the
following connection priority.
1. COMPONENT VIDEO
2.VIDEO
@-46