Kenwood KXF-W1030 Instruction Manual page 15

To pause recording temporarily
Pause
8
PAUSE
To stop recording
1
Stop the tape transport.
(dB) — —5 0 +3 +6 (dB)
2
Stop playing the source component.
How to provide non-recorded blanks between programs
In stop mode
Press successively twice.
¶
REC/ARM
Dolby noise reduction system
The Dolby noise reduction system was developed to reduce the tape hiss noise generated during playback.
The optimum effect of the Dolby NR system is obtained when the same type NR system is used for both recording and playback. If a
different type NR system is used, playback is not performed correctly. Make sure that the same type noise reduction system is used for
both recording and playback.
Dolby B NR
The most popular noise reduction system used in home audio components. Usually, Dolby NR system corresponds to B NR.
To resume recording
¶
REC/ARM
7
During recording
Press once.
¶
REC/ARM
How to record (deck B only)
÷ After leaving a non-recorded blank of about 4 seconds, the deck enters
the record-pause mode.
15