Kenwood B54-4552-00/00 KVT-819DVD Installation Manual page 4

Connection
USB device (commercially
available)
USB device (commercially
available)
Ignition key
switch
Car fuse box
Car fuse box
(Main fuse)
Ground wire (Black) - (To car chassis)
A
+ –
Battery
Connect to the vehicle's parking brake
detection switch harness using the
supplied relay connector.
Parking sensor wire (Light Green)
Connect to the terminal that is grounded when either
connect either to the control terminal of the motor antenna, or to the
power terminal for the booster amplifier of the film-type antenna.
|
4
KVT-819DVD/KVT-839DVD
USB connector (iPod)
USB connector
Ignition wire (Red)
ACC
Battery wire (Yellow)
PRK SW
For the sake of safety, be sure to connect the parking sensor.
To vehicle's reverse lamp harness
To car light control switch
the telephone rings or during conversation.
To connect the Kenwood navigation system,
consult your navigation manual.
Depending on what antenna you are using,
When using the optional power amplifier,
connect to its power control terminal.
To "EXT.AMP.CONT. " terminal of the amplifier
having the external amp control function.
If no connections are made, do not let the cable come out from the tab.
Monitor/Player unit
Wiring harness
(Accessory 2)
FUSE ( 5A )
Antenna Cord
FUSE ( 10A )
A
Reverse sensor wire (Purple/White)
Dimmer control wire (Orange/White)
Steering remote control input (Light Blue/Yellow)
To steering remote
Mute wire (Brown)
Motor antenna control wire (Blue)
Power control wire (Blue/White)
External amplifier control wire (Pink/Black)
Do not connect.
Accessory @
The cable (Accessory 3) is
fixed with a chassis using
harness band (Accessory
@).
Accessory 4
Battery wire (Yellow)
Ground wire (Black) - (To car chassis)