Samsung 450 Series User Manual page 15

16:9,4:3
16:9, Zoom1 ,
Zoom2,4:3
16:9, 4:3, Wide Fit,
Screen Fit
PC
OTV(1080i),
Component (1 080i, 1080p),
HOMI (720p, 1080i, 1080p)
ATV, AV,
Component (4801, 480p)
Picture Reset
(Reset Picture Mode I Cancel)
• After selecting Screen Fit in HOMI (1080il1080p) or
Component (1 080i/1 080p) mode, you may need to
center the picture:
1. Press the
~
or
~
button to select Position.
2. Press the ENTER [3l button.
3. Press the .. , T,
~
or
~
button to move the
picture.
4. Press the ENTER [3l button.
5.
Press the
~
or
~
button to select Reset.
6.
Press the ENTER [3l button.
• HO (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
• Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Resets your current picture mode to it's default settings.
• Reset Picture Mode: Returns all picture values in the
currently selected mode to the default settings.
• Digital Noise Filter (Off I Low / Medium I High I
Auto): If the broadcast signal received by your TV is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that may appear on
the screen.
~ When the signal is weak, try other options until the
best picture is displayed.
• HDMI Black Level (Normal/Low): Selects the black
level on the screen to adjust the screen depth.
~ Available only in HOMI mode (RGB signals).
• Film Mode (Off
I
Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality.
~ Available in TV, AV, COMPONENT (480i
I
1080i)
and HOMI (480i I 1080i).
• After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the
~
button to select Position.
2. Press the ENTER [3l button.
3. Press the .. or T button to move the picture up
or down.
4. Press the ENTER [3l button.
5. Press the
~
button to select Reset.
6. Press the ENTER
[31
button to reset the picture
to its default position.
• Color Tone (Cool
I
Normal
I
Warm1 / Warm2)
~ Warm1 or Warm2 will be deactivated when the
picture mode is Dynamic.
~ Settings can be adjusted and stored for each
external device connected to an input on the TV.
• Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1 : Use for moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3) mode.
~ Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn) which are not covered by the warranty.
Screen Fit: When receiving HOMI (720p/1 080i/1 080p),
Component (1 080i/1 080p) or OTV (1 080i) signals, use
this function to see the full image without any cutoff.
~ NOTE
(8
MENU
fII]
---+
Picture
---+
Picture Options
---+
ENTER[3l
~ In PC mode, you can only make changes to the Color
Tone, Size and Digital Noise Filter.
Picture Options
English
15