Display (Some Models); Leds - Electrolux washing machine Service Manual

5.4 Display (some models)

The display shows the following information:
three flashing digits, when the appliance is switched on.
the duration of the washing programme, which appears after selecting it. This time corresponds to
that necessary for the maximum load for every type of programme. After starting the programme, the
time diminishes (and updates) by every minute.
the end of the programme indicated by a "0" (when it is possible to open the door).
the delayed start, selected by the relative button. After pressing the START/PAUSE button, the
countdown starts and the delayed time diminishes by every hour. In the last 2 hours diminishes by
30min.
an alarm code, indicating anomalies in the functioning of the machine.

5.5 LEDs

The LEDs indicate different information according to the type of configuration; the End-of-cycle Led is
featured in all models.
Type of Led
Lights during selection mode if the programme includes the pre-wash phase, and during
Pre-wash
the execution of the pre-wash.
Lights during selection mode if the programme includes the wash phase, and during the
Wash
execution of the wash.
Lights during selection mode if the programme includes the pre-wash or wash phases, and
Pre-wash/Wash
during the execution of these phases.
Lights during selection mode if the programme includes rinse phases, and during the
Rinse
execution of the rinse.
Lights during selection mode if the programme includes the spin phase, and during the
Spin
execution of the spin.
Lights during selection mode if the programme includes the drain phase, and during the
Drain
execution of the drain
Lights when this option has been memorized (if included in the cycle) during the execution
Extra rinse
of the rinse.
Lights if the programme includes the rinse-hold option and at the end of the cycle, when
Rinse hold
the appliance stops with water in the tub.
Current cycle Lights during execution of the cycle
Lights when the programme has been completed; also used to display alarm conditions
End of cycle
Blocked filter Lights at the end of the cycle if the drain filter is blocked.
Overdosing Lights at the end of the cycle if an overdosing alarm of detergent occurs.
Lights when the appliance is switched on
ON/OFF
Door
Door locked Lights when the display shows the time-to-end
SOI/DT 2005-01 dmm
Lights when the door is locked by the interlock.
Switches off when the door is locked.
Flashes when the door is about to unlock (it is clear above all in models with safety
device with PTC)
Functions
14 599 36 86 11