4.1 Programming the PBX in the Los Angeles Office
*1
When "En-bloc" is selected, users need to press "#" after dialling the phone number to enter the dialled digits.
Note
For details about network parameter settings, refer to the relevant sections of the Hybrid IP-PBX
PC Programming Manual.
44
Getting Started
8.
a.
From the System Menu, click Configuration.
b.
Click Slot.
c.
Move the mouse pointer over the installed
VoIP Gateway Card to display the menu of
options.
d.
Click OUS.
You will see a confirmation message.
e.
Click OK.
f.
Move the mouse pointer over the installed
VoIP Gateway Card to display the menu of
options.
g.
Click Card Property.
9.
a.
Select the preferred En-bloc Dialling setting
(Overlap [default] or En-bloc
b.
Click OK.
10.
a.
Move the mouse pointer over the installed
VoIP Gateway Card to display the menu of
options.
b.
Click INS.
*1
).