Sony BRAVIA KDL-50W670A Operating Instructions Manual page 28

5
Install screws (8 mm in diameter, not
supplied) to the Wall-Mount Base and AC
Adapter Holder on the wall.
KDL-50W670A
AC Adapter Holder
Except KDL-50W670A
AC Adapter Holder
28
GB
Wall-Mount
Base
Wall-
Mount
Base
x Preparing for the installation of the TV
1
Remove the screws from the rear of the TV.
Be sure to store the removed screws in a
safe place, keeping them away from
children.
Soft cloth
~
• When removing the Table-Top Stand from the TV,
lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• Once the Stand Necks are detached from the
Stand, be sure to keep the Stand Necks and
screws in a safe place.
• When attaching the Table-Top Stand again, be
sure to fasten the screws (previously removed) to
the original holes on the rear of the TV.