Table of Contents
Advertisement
When a news bulletin is received, the NEWS
indicator will blinks and reception will begin at the
preset volume.
NOTE
• If you choose the " 20min " setting, further news
bulletins will not be received for 20 minutes once
the first news bulletin is received.
Setting the interval at the "OFF" factory default
indicates no News Timeout will be made, meaning
that additional news bulletins will continue to be
searched for.
•This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
EON-Network sending PTY-code for news bulletin.
3 Alternative Frequency Function
When poor reception is experienced,
automatically switch to another frequency
broadcasting the same programme in the same
RDS network with better reception.
The AF indicator is displayed when the AF
function is turned on.
Turning AF Function On/Off:
Touch [ ON ] or [ OFF ] to switch the function on and
off.
O
N
: AF function is turned on
: AF function is turned off
O F F
NOTE
When no other stations with stronger reception are
available for the same programme in the RDS
network, you may hear the incoming broadcast in bits
and snatches. Turn off the AF function in such a case.
3 Restricting RDS Region (Region Restrict
Function)
[REG]
You can choose whether or not to restrict the
RDS channels, received with the AF function for a
particular network, to a specific region. When the
Region Restrict Function is on, the region is
restricted and the REG indicator is displayed.
Turning Region Restrict Function On/Off:
Touch [ ON ] or [ OFF ] to switch the function on and
off.
O
N
: Region restrict function is turned on
: Region restrict function is turned off
O F F
NOTE
Sometimes stations in the same network broadcast
different programmes or use different programme
service names.
3 Auto TP Seek Function
When the TI function is on and poor reception
conditions are experienced when listening to a
traffic information station, another traffic
information station with better reception will be
searched for automatically. This function is on,
when unit is first powered on.
Turning Auto TP Seek Function On/Off:
Touch [ ON ] or [ OFF ] to switch the function on and
off.
O
N
: Auto TP seek function is turned on
: Auto TP seek function is turned off
O F F
3 Ending the RDS Setting Screen
Touch [ RTN ] to return to the setup menu screen.
[AF]
[ATPS]
13
Hide quick links:
Advertisement
Table of Contents
