3.2.2. EthernetAddress
NoDefinedCredentials
Comments
3.2.1.5. IP4Address
Description
Use an IP4 Address item to define a name for a specific IP4 host, network or range.
Properties
Name
Address
UserAuthGroups
NoDefinedCredentials
Comments
3.2.2. EthernetAddress
The definitions here are the same as in Section 3.2.1.3, "EthernetAddress" .
3.2.3. EthernetAddressGroup
The definitions here are the same as in Section 3.2.1.4, "EthernetAddressGroup" .
3.2.4. IP4Address
The definitions here are the same as in Section 3.2.1.5, "IP4Address" .
3.2.5. IP4Group
The definitions here are the same as in Section 3.2.1.2, "IP4Group" .
3.2.6. IP4HAAddress
The definitions here are the same as in Section 3.2.1.1, "IP4HAAddress" .
ations networks in rules. (Optional)
If this property is enabled the object requires user authentication,
but has no credentials (user names or groups) defined. This means
that the object only requires that a user is authenticated, but ig-
nores any kind of group membership. (Default: No)
Text describing the current object. (Optional)
Specifies a symbolic name for the network object. (Identifier)
IP address, e.g. "172.16.50.8", "192.168.30.7,192.168.30.11",
"192.168.7.0/24" or "172.16.25.10-172.16.25.50".
Groups and user names that belong to this object. Objects that fil-
ter on credentials can only be used as source networks and destin-
ations networks in rules. (Optional)
If this property is enabled the object requires user authentication,
but has no credentials (user names or groups) defined. This means
that the object only requires that a user is authenticated, but ig-
nores any kind of group membership. (Default: No)
Text describing the current object. (Optional)
80
Chapter 3. Configuration Reference