Miele Built-in coffee machine Operating And Installation Instructions page 12

Warning and Safety instructions
Technical safety
~
Repairs and installation work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised
work. Installation work and repairs to electrical appliances must only
be carried out by a Miele approved service technician.
~
A damaged appliance is dangerous. Check it for any visible
damage. Never install or attempt to use a damaged appliance.
~
Before connecting the appliance to the mains supply, make sure
that the rating on the data plate corresponds to the voltage and
frequency of the household supply. This data must correspond in
order to avoid the risk of damage to the appliance. Consult a
qualified electrician if in any doubt.
~
The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system. It is most important that this basic safety requirement is
present and tested regularly and, where there is any doubt, the
household wiring system should be inspected by a qualified
electrician.
~
Do not connect the machine to the mains electricity supply by a
multi-socket adapter or an extension lead. These do not guarantee
the safety of the appliance (e.g. danger of overheating).
~
For safety reasons, this appliance may only be used when it has
been built in.
~
If the coffee machine is to be built in above another appliance,
there must be a full-width, closed shelf between them (except in
combination with a built-in Miele plate warming drawer).
~
This appliance must not be installed and operated in mobile
installations (e.g. on a ship).
12