Panasonic KX-UTG300 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. IP Phone
  5. KX-UTG300
  6. Operating instructions manual

Panasonic KX-UTG300 Operating Instructions Manual

Sip phone
Hide thumbs Also See for KX-UTG300:
Table of Contents

Advertisement

Quick Links

See also: Administrator's Manual , Operating Instructions Manual

Operating Instructions

SIP Phone

KX-UTG300
Model No.
<KX-UTG300>
Thank you for purchasing this Panasonic product.
Please read this manual carefully before using this product and save this manual for future use.
KX-UTG300: Software File Version 1.131 or later
Document Version: 2014-04

Advertisement

Table of Contents
loading

Related Manuals for Panasonic KX-UTG300

Summary of Contents for Panasonic KX-UTG300

  • Page 1: Operating Instructions

    Operating Instructions SIP Phone KX-UTG300 Model No. <KX-UTG300> Thank you for purchasing this Panasonic product. Please read this manual carefully before using this product and save this manual for future use. KX-UTG300: Software File Version 1.131 or later Document Version: 2014-04...

  • Page 2: Feature Highlights

    Getting Started Briefly describes basic information about the installation of the unit. Administrator Guide Describes information about the programming and maintenance of the unit. Manuals and supporting information are provided on the Panasonic Web site at: http://www.panasonic.com/sip Note • The contents and design of the software are subject to change without notice.

  • Page 3: Other Information

    Bluetooth SIG, Inc. and any ® use of such marks by Panasonic System Communications Company of North America is under license. • Plantronics is a trademark or registered trademark of Plantronics, Inc.
  • Page 4 Introduction For Future Reference Record the information in the space below for future reference. Note • The serial number and MAC address of this product may be found on the label affixed to the bottom of the unit. You should note the serial number and MAC address of this unit in the space provided and retain this manual as a permanent record of your purchase to aid in identification in the event of theft.

  • Page 5: Table Of Contents

    Table of Contents Table of Contents Important Information ................8 Data Security ........................8 Additional Information ......................9 Before Operating the Telephone ............11 Accessory Information ....................11 Location of Controls .......................12 Screens ..........................15 Icons ..........................16 Soft Button List .......................18 Basic Operations ......................20 Confirming Your Extension Number ................20 Going off- and on-hook ....................20 Adjusting the Volume .....................20 Feature Operations ................21...
  • Page 6 Table of Contents Contacts .........................34 Sending Messages to Contacts ..................35 Calling Contacts ......................35 Making Conference Calls ....................35 Customizing the Telephone ..............36 Phonebook List .......................36 Adding a New Phonebook Entry ..................36 Adding a Phonebook Entry from the Call Log ..............36 Editing a Phonebook Entry .....................36 Searching for a Phonebook Entry ..................37 Deleting a Phonebook Entry ...................37 Export/Import Phonebook Entries ..................37...
  • Page 7 Table of Contents Index......................93 Document Version 2014-04 Operating Instructions...

  • Page 8: Important Information

    Numbers stored in One-touch Dialing buttons • Security settings, such as passwords, cannot be – Passwords used to log in to the Web user interface undone at Panasonic service centers. Take – Call logs measures to prevent passwords from being lost or forgotten.

  • Page 9: Additional Information

    RF energy commonly emitted by digital Model Number: KX-UTG300 devices. Responsible Party: This unit features a built-in Bluetooth module that Panasonic Corporation of North America can be used to wirelessly connect a Bluetooth Two Riverfront Plaza headset to the unit. Newark, NJ 07102-5490 U.S.A.
  • Page 10 Important Information Compliance with TIA-1083 standard Telephone handsets identified with Compatible with Hearing Aid T-Coil this logo have reduced noise and interference when used with T-Coil equipped hearing aids and cochlear implants. TIA-1083 Operating Instructions Document Version 2014-04...

  • Page 11: Before Operating The Telephone

    Before Operating the Telephone Before Operating the Telephone Accessory Information Included Accessories Handset (1) Handset Cord (1) [Part No.] [Part No.] 95.1204T00 371.00447.005 Stand (1) Ethernet cable (1) [Part No.] [Part No.] 371.00473.005 467.00209.005 For extra orders for the accessories, call toll-free: 1-800-332-5368. Note •...

  • Page 12: Location Of Controls

    Before Operating the Telephone Location of Controls Front View K L M N Handset Hook Keeps the handset stable when the unit is mounted on a wall. LCD (Liquid Crystal Display) The unit is equipped with a 5.0-inch color LCD touch screen and LCD backlight. Message/Ringer Lamp When you receive a call, the lamp flashes red.
  • Page 13 Before Operating the Telephone CONFERENCE Used to establish a three-way conference. TRANSFER Used to transfer a call to another party. MUTE Used to mute the microphone/handset/headset during a conversation. When the MUTE is used, its lamp turns red. REDIAL Used to redial the last dialed number. HOLD Used to put a call on hold.
  • Page 14 Before Operating the Telephone Bottom View C D E F DC Jack LAN Port PC Port EHS Jack Headset Jack Handset Jack Operating Instructions Document Version 2014-04...

  • Page 15: Screens

    Before Operating the Telephone Screens This section explains the screens, and the buttons and icons that appear on the display. Home Screen Status Bar Indicates the status of various features (Page 16) as well as information such as the date and time. Home Screen Icons The Home screen icons can be used to access various functions and screens on the phone.

  • Page 16: Icons

    Before Operating the Telephone Phone Screen Line Buttons Line buttons are used to access the lines registered to the unit. Line buttons can be selected by touching them or by pressing [ ] or [ ]. A maximum of 6 lines can be registered to the unit. The status of line buttons can be confirmed with the displayed line icons (Page 17).

  • Page 17: Line Icons

    Before Operating the Telephone Icon Description Displayed when the Bluetooth feature is activated and connected to a device. (Page 68). Displayed when ECO mode is enabled. Displayed when a firmware upgrade is available. Line Icons Line icons indicate the status of lines in the Phone or Call log screens. General Line Shared Line Description...

  • Page 18: Soft Button List

    Before Operating the Telephone Icon Description Displayed when dialing off-hook, or when on an active incoming or outgoing call. Displayed when there is an incoming call. Displayed when a call is on hold. Displayed when an incoming call is on hold. Displayed when another phone on a shared line is on call.
  • Page 19 Before Operating the Telephone Button Description Save or confirm the information shown on the display, or enter into the next Enter screen. Note • You can also use the physical [ENTER] button to perform the same operation as this soft button. Display other available soft buttons.

  • Page 20: Basic Operations

    Before Operating the Telephone Basic Operations • In stand-by mode, press [SP-PHONE]. • During a conversation while using the handset, This section explains the basics of using the unit. press [SP-PHONE]. You can then return the handset to its cradle. •...

  • Page 21: Feature Operations

    Feature Operations Feature Operations Go off-hook. To end the call, go on-hook. Note Making Calls • For details about entering characters, see "Entering Characters (Page 52)". This section explains the basic methods for making a • In step 4, if multiple phone numbers are stored call.

  • Page 22: One-Touch Dialing

    Feature Operations Press [REDIAL]. Press [ ] or [ ] to select the page group, and then touch To end the call, go on-hook. Start Make the announcement. Note To end the announcement, touch Stop • To select a line to use to redial, touch the Receiving multicast paging announcements appropriate line button before you press [REDIAL].

  • Page 23: Receiving Calls

    Feature Operations Receiving Calls Touch Note This section explains the basic methods for receiving a • Rejected phone numbers will not be stored in call. the incoming or missed call log. • Depending on the line a call is arriving on, the call may not be rejected.

  • Page 24: Ignoring Calls

    Feature Operations Holding a Call Press [ ] or [ ] to select "Call Block", and then press [ENTER]. Press [ ] or [ ] to select the phone number you You can put a call on hold by holding the call at your want to edit, and then touch Edit extension.

  • Page 25: Receiving A Second Call (Answering Call Waiting)

    Feature Operations Receiving a Second Call Talking to Two Parties (Answering Call Waiting) Alternately (Call Splitting) During a conversation, if a second call arrives, you will When you are talking to one party and have another hear a call waiting tone. party on hold, you can switch the call on hold and the You can answer the second call by disconnecting or current call.

  • Page 26: Transferring A Call (Call Transfer)

    Feature Operations Transferring a Call (Call Wait until the other party answers to announce the transfer. Transfer) Press [TRANSFER]. Go on-hook. You can transfer a call to another destination (extension Note or outside party). • For details about flexible buttons on the To transfer KX-UTA336, see "Using Flexible Buttons with the KX-UTA336 (Page 31)".

  • Page 27: Mute

    Feature Operations Mute Conference Call You can mute your voice during a conversation. While During a conversation, you can add an additional party the mute feature is turned on, you will be able to hear to your call and establish a conference call. the other party, but the other party will not be able to Notice hear you.

  • Page 28: Checking Messages

    Feature Operations Checking Messages Checking Missed Calls When there are new missed calls, appears in the Checking New Messages Phone screen. On the Home screen, select When you receive a voice message, is displayed Press [ ] or [ ] to select "Missed Calls", and then on the line button that received the call, and the press [ENTER].

  • Page 29: Call Forwarding/Do Not Disturb

    Feature Operations Call Forwarding/Do Not SCA (Shared Call Disturb Appearance) You can have received calls automatically forwarded to SCA (Shared Call appearance) or shared line is a another destination. You can also have received calls feature that allows multiple units to use a shared line. rejected (Do Not Disturb).

  • Page 30: Flexible Buttons

    Feature Operations Flexible Buttons The flexible buttons on the unit can be customized to be used to make or receive calls or as feature buttons. These buttons are configured by your administrator or dealer. Access the Flexible button screen by selecting on the Home screen or by touching on the Phone FlexibleBtn...

  • Page 31: Using Flexible Buttons With The Kx-Uta336

    Feature Operations Icon Description Indicates a BLF flexible button is idle. Indicates a BLF flexible button is busy. Indicates a BLF flexible button is alert. Indicates a call with BLF flexible button is parked. Using Flexible Buttons with the KX-UTA336 The optional KX-UTA336 allows 36 additional flexible buttons (3 pages of 12) to be used with the unit.
  • Page 32 Feature Operations Description Press these buttons to select the corresponding flexible buttons. Operating Instructions Document Version 2014-04...

  • Page 33: Im&P (Instant Messaging & Presence)

    Feature Operations IM&P (Instant Messaging & Presence) IM&P (Instant Messaging & Presence) is a service that enables you to send short messages and call other users registered to the service. In order to use IM&P, you must have a user account. For more information, consult your administrator or dealer.

  • Page 34: Presence

    Feature Operations • The IM&P screen is displayed. Logging out On the IM&P screen, touch Logout Presence Presence is used to show the status of users. You can check if other users are available by checking the presence displayed next to their names. Other users can also check if you are available by checking your presence. The following types of presences can be used.

  • Page 35: Sending Messages To Contacts

    Feature Operations Contact Type List Screen The following screen is an "All Contacts" screen. Contact type Contacts Available actions Status of contacts Sending Messages to Contacts You can send instant messages to your contacts. Messages can be a maximum of 128 characters in length. Sending Messages On the IM&P screen, press [ ] or [ ] to select the contact type.

  • Page 36: Customizing The Telephone

    Customizing the Telephone Customizing the Telephone Phonebook List • Press [ ] or [ ] to select "Phonebook", and then press [ENTER]. Enter a name (max. 24 characters). Press [ ] or [ ] to select the phone number type Adding a New Phonebook Entry (A to E) or "Ringtone".

  • Page 37: Searching For A Phonebook Entry

    Customizing the Telephone Searching for a Phonebook Local Phonebook Entry The phonebook stored on the unit is referred to as Local Phonebook. If other types of phonebooks, such as You can search the phonebook for the desired entry. LDAP phonebook, are available, use the steps below to On the Home screen, select access the local phonebook.
  • Page 38 Customizing the Telephone Touch Call Searching for an Enterprise Phonebook Entry On the Home screen, select Press [ ] or [ ] to select "Directories", and then press [ENTER]. Touch Search Operating Instructions Document Version 2014-04...

  • Page 39: User Settings

    Customizing the Telephone User Settings You can configure various settings to customize the behavior of the unit. This section explains how to configure the settings using the unit. Accessing the Settings On the Home screen, select Press [ ] or [ ] to select the desired setting category, and then press [ENTER]. Configure the settings as necessary.

  • Page 40: Network Settings

    Customizing the Telephone Menu Item Setting Ref. Enable FWD Busy Page 45 FWD Busy Number Page 45 Enable FWD No Ans Page 46 FWD No Ans Number Page 46 FWD No Ans Ring Count Page 46 Block Anonymous Call — Page 46 Information Display Displays a variety of information about the unit.

  • Page 41: Application Settings

    Customizing the Telephone Menu Item Setting Sub-Setting Ref. VLAN Settings Enable IP Phone VLAN — Page 48 IP Phone VLAN ID — Page 48 Enable PC VLAN — Page 48 PC VLAN ID — Page 48 802.1x Enable 802.1x — Page 49 Authentication Protocol —...

  • Page 42: Settings Details

    Customizing the Telephone Network Test Menu Item Setting Ref. IP Address — Page 51 IPv6 Address — Page 51 Reset Menu Item Setting Ref. Exclude Private Settings — Page 51 Exclude Network Settings — Page 51 Restart The unit can be restarted as necessary. See Page 51 for more information. Settings Details Basic Phone Settings Date and Time...
  • Page 43 Customizing the Telephone Ringtone Setting Description Value Range Default Ringtone Select a ringtone to play when you Automatic, Silence, Automatic receive a call. If multiple lines are Ringtone 1– configured on your unit, you must first Ringtone 9 select which line to use the ringtone for.

  • Page 44: Call Block

    Customizing the Telephone Call Block Setting Description Value Range Default Call Block Register telephone numbers so that — — calls received from those numbers are blocked. You can also delete registered numbers. To register Touch Enter the telephone number to block, and then touch Save To edit...

  • Page 45: Basic Call Features

    Customizing the Telephone ECO Mode Setting Description Value Range Default ECO Mode Enabling this mode reduces the On, Off amount of electricity consumed by the unit. Note • When ECO mode is enabled, the Speed/Duplex setting (Page 49) for LAN Port and PC Port changes as follows: –...

  • Page 46: Information Display

    Customizing the Telephone Setting Sub-Setting Description Value Range Default Enable FWD No Ans Enable or disable forwarding On, Off of incoming calls to a specified destination if you do not answer after a specified number of rings. FWD No Ans Number Specify the number to forward 1-32 digits —...

  • Page 47: Network Settings

    Customizing the Telephone Network Settings IMPORTANT We recommend configuring these settings with your administrator or dealer. Network settings can also be configured through Web user interface programming (Page 54). Contact your administrator or dealer for further information. Network Setting Sub-Setting Description Value Range Default...

  • Page 48: Lldp Settings

    Customizing the Telephone Setting Sub-Setting Description Value Range Default IPv6 Default If DHCP is not enabled, you 1-46 characters — Gateway must specify the default gateway. IPv6 Auto DNS Enable or disable Auto DNS Yes, No for IPv6. IPv6 DNS1 If IPv6 Auto DNS is not 1-46 characters —...

  • Page 49: Port Mirroring

    Customizing the Telephone 802.1x Setting Description Value Range Default Enable 802.1x Enable or disable 802.1x. Yes, No Authentication Protocol Select the authentication EAP-MD5 EAP-MD5 protocol. EAP-TLS EAP-FAST EAP-PEAP-GTC EAP-PEAP-MSCHAPv2 EAP-TTLS-GTC EAP-TTLS-MSCHAPv2 Authentication ID Enter the authentication ID. 1-127 characters — Authentication Password Enter the authentication 1-127 characters...

  • Page 50: Application Settings

    Customizing the Telephone HTTP Authentication Setting Description Value Range Default User ID Enter the authentication ID. 1-127 characters — Password Enter the authentication password. 1-127 characters — Provisioning Setting Sub-Setting Description Value Range Default Enable Provisioning — Enable or disable Yes, No provisioning.

  • Page 51: Network Test

    Customizing the Telephone Setting Description Value Range Default Service URL Enter the service URL. 1-128 characters — User ID Enter the user ID. 1-64 characters — User Password Enter the user password. 1-64 characters — Network Test Confirm whether other network devices (e.g., SIP server, routers, switching hubs) respond to network requests. If a device does not respond, first check the unit's network settings, and then check the device's network settings and connection.

  • Page 52: Entering Characters

    Customizing the Telephone Entering Characters The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it. (For example, a, b and c are assigned to the 1 key.) To enter a character, press the corresponding dial key until the character you want appears. To enter another character that is assigned to the same key, first press [ ] to move the cursor to the right.

  • Page 53: Document Version 2014-04 Operating Instructions

    Customizing the Telephone Button Characters g h i 4 G H I j k l 5 J K L m n o 6 M N O p q r s 7 P Q R S t u v 8 T U V w x y z 9 W X Y Z <Space>...

  • Page 54: Web User Interface Programming

    Customizing the Telephone Web User Interface Programming The unit provides a Web-based interface for configuring various settings and features, including some that are not programmable directly from the unit. The following list contains some useful features that are programmable through the Web user interface. For details, consult your administrator or dealer.

  • Page 55: Installation And Setup

    Installation and Setup Installation and Setup Notice • Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Attaching/Removing the Stand Attaching the Stand Notice • If you place the display face down when you attach the stand, be sure to place a soft cloth under the display.
  • Page 56 Installation and Setup Adjusting from High to Low Position Tilt the stand in the direction indicated while pushing the PUSH mark with both hands as shown until it locks into the low position ( Adjusting from Low to High Position Operating Instructions Document Version 2014-04...
  • Page 57 Installation and Setup Tilt the stand in the direction indicated while pushing the PUSH mark with both hands as shown until it locks into the high position ( Document Version 2014-04 Operating Instructions...

  • Page 58: Connections

    EHS headsets/USB headsets Selected Plantronics -brand headsets ® Selected Jabra -brand headsets ® – Bluetooth headsets For up-to-date information about headsets that have been tested with this unit, refer to the following web site: http://www.panasonic.com/sip Operating Instructions Document Version 2014-04...
  • Page 59 Installation and Setup When connecting the Ethernet cable • Connect the cables as shown in the following illustration. Incorrect Correct Ethernet cable Ethernet cable 60 mm (2 or less • Use the included Ethernet cable. When connecting to a switching hub •...
  • Page 60 Installation and Setup Connections for Handset Operating Instructions Document Version 2014-04...

  • Page 61: Installing The Kx-Uta336

    Installation and Setup Installing the KX-UTA336 The optional KX-UTA336 allows 36 additional flexible buttons (3 pages of 12) to be used with the unit. These flexible buttons are used to make calls or receive calls, or perform a feature that has been assigned to the button.
  • Page 62 Installation and Setup Secure the KX-UTA336 to the KX-UTG300 by inserting the 2 screws supplied with the KX-UTA336 into the rear of the KX-UTG300. Operating Instructions Document Version 2014-04...

  • Page 63: Wall Mounting

    Installation and Setup Wall Mounting Before Mounting on a Wall To mount the unit, it is necessary to remove the stand. For details, see "Removing the Stand (Page 55)". Mounting the Unit WARNING • Do not mount the unit in a manner other than that described in this section. •...
  • Page 64 Installation and Setup Fasten the wall mounting adaptor to the base with 1 screw. (Recommended torque: 0.4 N·m [4.08 kgf·cm/ 3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in]) Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the illustration below.
  • Page 65 Installation and Setup Drive the 2 screws into the wall either 83 mm (3 in) or 100 mm (3 in) apart, and mount the unit on the wall. 83 mm 100 mm Washer Drive the screw to this point. Note •...

  • Page 66: Hooking The Handset

    Installation and Setup Hooking the Handset You can hook the handset with the following operations. To Hook the Handset During a Conversation Hook the handset over the top edge of the unit. To Lock the Handset Hook when the Unit is Wall Mounted Remove the handset hook from the slot.
  • Page 67 Installation and Setup Handset is safely hooked when it is in the cradle. Document Version 2014-04 Operating Instructions...

  • Page 68: Using A Headset

    Installation and Setup Deleting the Bluetooth headset Using a Headset Delete the Bluetooth headsets that are no longer used from the unit. If a headset is connected, you must enable Headset mode by pressing [HEADSET]. On the Home screen, select Press [ ] or [ ] to select "Basic Phone Settings", Note and then press [ENTER].

  • Page 69: Usb Headsets

    Installation and Setup USB devices can be connected to the KX-UTA336 Maintaining the Unit (Page 61). Resetting the Unit USB Headsets Resetting all settings except for private USB headsets can be used with the unit. See settings Page 58 for information on supported headsets. Executing "Exclude Private Settings"...

  • Page 70: Cleaning The Unit

    Installation and Setup Cleaning the Unit Clean the unit periodically by wiping it with a soft and dry cloth. When cleaning the unit, observe the following precautions. When cleaning the display • Wipe the display with only the following types of materials: –...

  • Page 71: Open Source Software

    Open Source Software Open Source Software Parts of this product use Open Source Software. Relevant conditions apply to this software. Panasonic cannot accept inquiries regarding the content of the following copyright and license information. <<dropbear-0.52>> Copyright (c) 2002-2013 Matt Johnston Portions copyright (c) 2004 Mihnea Stoenescu All rights reserved.
  • Page 72 Open Source Software Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:...
  • Page 73 Open Source Software * uses many of the tricks described therein. Only the crecip function is taken * from the sample implementation. <<curl-7.31.0>> COPYRIGHT AND PERMISSION NOTICE Copyright (c) 1996 - 2014, Daniel Stenberg, <daniel@haxx.se>. All rights reserved. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies.
  • Page 74 Open Source Software The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses.
  • Page 75 Open Source Software * All rights reserved. * This package is an SSL implementation written * by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * This library is free for commercial and non-commercial use as long as * the following conditions are aheared to.
  • Page 76 Open Source Software GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
  • Page 77 Open Source Software either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program).
  • Page 78 Open Source Software under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;...
  • Page 79 Open Source Software distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.
  • Page 80 Open Source Software 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY...
  • Page 81 Open Source Software proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License. <<net-snmp-5.7.2>>...
  • Page 82 Open Source Software ---- Part 3: Cambridge Broadband Ltd. copyright notice (BSD) ----- Portions of this code are copyright (c) 2001-2003, Cambridge Broadband Ltd. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 83 Open Source Software WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ---- Part 5: Sparta, Inc copyright notice (BSD) ----- Copyright (c) 2003-2009, Sparta, Inc All rights reserved.
  • Page 84 Open Source Software ---- Part 7: Fabasoft R&D Software GmbH & Co KG copyright notice (BSD) ----- Copyright (c) Fabasoft R&D Software GmbH & Co KG, 2003 oss@fabasoft.com Author: Bernhard Penz Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  • Page 85 Open Source Software Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

  • Page 86: Appendix

    Appendix Appendix Specifications Item Specifications LCD Display Color, WVGA LCD Size 5.0 inch LCD Brightness 14 levels Flexible Buttons 24 (Three pages of eight flexible buttons are shown on the display) VoIP Connection Method VoIP Audio Codec G.711A, G.711U, G.729AB, G.722, G.726 Ethernet Interface 10Base-T/100Base-TX/1000Base-T IP Address Mode...
  • Page 87 Appendix Item Specifications Operating Environment 0 °C to 40 °C (32 °F to 104 °F) Document Version 2014-04 Operating Instructions...

  • Page 88: Troubleshooting

    Appendix Troubleshooting Common Issues and Solutions General Use Issue Possible Cause & Solution Reference The display is blank. • The unit is not receiving power. → The unit is not designed to function when there is a power failure. Make sure that the device supplying PoE is Page 58 receiving power and that the Ethernet cable is properly connected.

  • Page 89: Making And Receiving Calls

    Appendix Making and Receiving Calls Issue Possible Cause & Solution Reference I cannot make calls. • Your phone system/service has disabled service for your unit. → On the Information Display screen (Page 40), if "Not — registered" is displayed for the lines registered to your phone, consult your administrator or dealer.

  • Page 90: Bluetooth Headset

    Appendix Issue Possible Cause & Solution Reference Sound cuts out; I can hear • You are too far away from the microphone. — myself through the → Try speaking closer to the microphone. speaker. • The environment is not suited to speakerphone calls. →...
  • Page 91 Appendix USB Devices Issue Possible Cause & Solution Reference The USB device I • You connected a USB device that this unit does not support. connected does not work. → Consult your administrator or dealer for information on supported devices. •...

  • Page 92: Error Messages

    Appendix Error Messages During operation, error messages might appear on the unit. The following table lists these messages and possible causes and solutions. Message Possible Cause & Solution Reference IP Address, Subnet Mask and Default • The unit’s network settings are incorrect. Gateway are not matched.
  • Page 93 Index Index Date (setting) Date and Time (setting) Date Template (setting) Numerics DC jack 802.1x (setting) Delay Time (0-10) (setting) DHCP Options (setting) Dialing Display AC adaptor Display Lock (setting) Connection Do Not Disturb Accessories Add-on key module 11, 61 Add-on key module slot cover Application Server (setting) ECO Mode (setting)
  • Page 94 Index Headset jack MUTE button Hold HOLD button HOME Navigator Key Home screen Network (setting) Home screen icons Network Test Icons Network Test (setting) Hotline (setting) HTTP Authentication (setting) One-touch Dialing One-Touch flexible button Icons Optional Group Features Ignoring Calls IM&P Calling Contacts Contacts...
  • Page 95 Index Icons 15, 16 Speaker Volume Speakerphone (SP-PHONE) button Specifications Speed/Duplex (setting) SP-PHONE (Speakerphone) button Stand Adjusting Attaching Removing Status bar Status Icons Time (setting) Transfer TRANSFER button Troubleshooting USB devices USB headsets USB hubs USB port Use 12-hour Format (setting) User ID (setting) 50, 51 User Password (setting)
  • Page 96 One screw here WALL MOUNTING TEMPLATE 1. Drive the screws into the wall as indicated. 2. Hook the unit onto the screw heads. Note: Make sure to set the print size to correspond with the size of this page. If the dimensions of the paper output still deviate slightly from the measurements indicated here, use the measurements indicated...
  • Page 97 Notes Document Version 2014-04 Operating Instructions...
  • Page 98 Notes Operating Instructions Document Version 2014-04...
  • Page 99 Notes Document Version 2014-04 Operating Instructions...
  • Page 100 Copyright: This material is copyrighted by Panasonic System Communications Company of North America, and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Communications Company of North America.

Table of Contents