Pioneer DDJ-WeGO3 Operation Manual page 8

Virtualdj 8
Hide thumbs Also See for DDJ-WeGO3:
Table of Contents

Advertisement

21. FX1: Press this button to activate the selected effect of slot 1. Hold SHIFT and then
press this button to select the next available Effect from the list for Effect slot 1.
If the Effect is enabled, use the Jog to control the 1
Effect.
Hold SHIFT down and then use the Jog to control the 2
Effect.
While the Effect is active, the red illumination of the Jog will indicate the value of the
Effect parameter.
22. FX2: Press this button to activate the selected effect of slot 2. Hold SHIFT and then
press this button to select the next available Effect from the list for Effect slot 2
If the Effect is enabled, use the Jog to control the 1
Effect.
Hold SHIFT down and then use the Jog to control the 2
Effect.
While the Effect is active, the red illumination of the Jog will indicate the value of the
Effect parameter.
23. FX3: Press this button to activate the selected effect of slot 3. Hold SHIFT and then
press this button to select the next available Effect from the list for Effect slot 3
If the Effect is enabled, use the Jog to control the 1
Effect.
Hold SHIFT down and then use the Jog to control the 2
Effect.
While the Effect is active, the red illumination of the Jog will indicate the value of the
Effect parameter.
24. SAMPLER MODE. Use this button to toggle between the Sampler and the HotCue
mode for the HotCue/Sampler buttons (25). The led if this button will be lit if the
Sampler mode is selected.
25. HOTCUE/SAMPLES (1-4). The 4 numbered buttons offer different functionality
depending on the selected mode (24).
In HotCue mode, each one of the 4 buttons assigns Hot Cue Point (1 to 4) or returns
the track to that Hot Cue Point if the HotCue is assigned.
When a Hot Cue Button is unlit, you can assign a Hot Cue Point by pressing it at the
desired point in your track.
Hold SHIFT down and then press a button to delete its assigned Hot Cue Point.
In Sampler mode, each one of the 4 buttons triggers a Sample from the selected
Sampler Bank of VirtualDJ. If the selected bank has less than 5 samples, both sides
of the DDJ-WeGO3 will control the same samples. If the selected Sampler bank has
more than 4 samples, the left side of the DDJ-WeGO3 will control samples 1 to 4 and
the right side will control samples 5 to 8.
The trigger/playing behavior depends on the selected Trigger mode of the Bank
(On/Off, Hold, Stutter or Unmute) and can be changed from the VirtualDJ Browser in
the Sampler view of the Side View.
Hold SHIFT down and then use the same buttons to play-stutter the sample.
VirtualDJ 8 – Pioneer DDJ-WeGO3
st
parameter of the selected
nd
parameter of the selected
st
parameter of the selected
nd
parameter of the selected
st
parameter of the selected
nd
parameter of the selected
8

Advertisement

Table of Contents
loading

Table of Contents