Samsung iDCS 500 General Description Manual page 68

DIRECT STATION SELECTION (DSS)
Programmable keys can be assigned as DSS keys and associated with extension
numbers. Users press these keys to call or transfer calls to the assigned stations.
DO NOT DISTURB (OVERRIDE)
The DND Override feature allows a keyset with a DND Override key (DNDO) and
the appropriate class of service to override the DND setting at a called keyset. This
will allow a user to go into DND while waiting for an important call and have that
call transferred to them via a screened transfer from a station (for example the us-
ers secretary) with a DNDO key.
DO NOT DISTURB (PROGRAMMABLE)
The Do Not Disturb (DND) feature is used to stop all calls to a station. System pro-
gramming can allow or deny use of the DND feature for each station. Parties calling
a station in DND will receive reorder tone. When in DND mode, calls may be for-
warded to another destination. See Forward DND option. A keyset without a DND
button can activate DND via the feature access code. The ANS/RLS key will flash at
112 ipm (rapidly) when DND is set. There is a programmable option to allow a C.O.
line to override DND at its ring destination if that destination is a single station.
DOOR LOCK RELEASE
Stations programmed to receive calls from a door phone can dial a code to acti-
vate a contact closure for control of a customer-provided electronic door lock.
EXCLUSIVE HOLD
Pressing HOLD twice will hold a call exclusively at a station so no other station can
pick up that call. Intercom calls are automatically placed on exclusive hold.
GROUP LISTENING
This feature allows users to turn on the speaker while using the handset. It allows a
group of people to listen to the distant party over the speaker without the micro-
phone turned on.
HEADSET OPERATION
Every keyset can be programmed to allow the use of a headset. In the headset
mode, the hookswitch is disabled and the ANS/RLS key is used to answer and
release calls. Keyset users may turn headset operation ON/OFF by keyset pro-
gramming or more easily by pressing the headset ON/OFF key. The headset key
lights steady red when the keyset is in headset mode. The ANS/RLS key lights if
headset mode is activated by keyset programming only.
HEARING AID COMPATIBLE
All iDCS 500 keysets are hearing aid compatible as required by Part 68 of the FCC
requirements.
4.34