Panasonic TH-80OLFB70U Operating Instructions Manual page 15

Network Settings
3
Select [Save] and press
Save the current network settings.
■
Default settings of [M-DIRECT]
The following settings as [M-DIRECT] in the [Wireless LAN] are set before the Display leaves the factory.
IP address
Subnet mask
SSID
Channel
Key
Wireless Network
Standby
Wireless WEB Control Off
•
The authentication method is WPA2-PSK, and the encryption method is AES. Both methods are fi xed.
•
When you need to change initial confi guration of [M-DIRECT], please contact your network administrator.
•
Make sure the initial Key is changed for safety.
•
As the DHCP server is already functioning, select [ON] before connecting a computer.
Confi guration of Wireless LAN [USER1] - [USER3]
1
Select [USER1] – [USER3] for [Wireless LAN].
Wireless LAN
Save
Wireless LAN
Name Change
DHCP
IP address
Subnet mask
Gateway
SSID
2
Set [DHCP].
When [Off] is selected, IP address and other settings can be set manually.
Name Change
DHCP
(DHCP client function)
IP address
(Display of IP address and setting)
Subnet mask
(Displaying and setting the subnet mask)
Gateway
(Display of gateway address and setting)
•
If [DHCP] is set to [On], the IP address and other items are not displayed. Check the [Network Status] page for
the current IP address and other items. (See page 20)
•
Before using the DHCP server, make sure the DHCP server is already functioning.
•
For details of IP address, subnet mask, and gateway, ask the network administrator.
•
A wired LAN and wireless LAN cannot be used in the same segment.
button.
192.168.11.100
255.255.255.0
M-DIRECT + The last 4 digits of the Display ID
1
The same string as the SSID
Off (for TH-80LFB70U, TH-80LFB70W)
1
USER1
Off
192.168.11.100
255.255.255. 0
192.168.11.1
2
3
4
You can change the user name. Entering characters
On: If a DHCP server exists in the network to which the display is
connected, the IP address will automatically be acquired.
Off: If a DHCP server does not exist in the network to which the
display is connected, additionally set [IP address], [Subnet mask]
and [Gateway].
Enter the IP address if DHCP server is not used.
If not using a DHCP server, enter the subnet mask.
Enter the gateway address if DHCP server is not used.
Select the item and press
IP address
000.192.168.11
1 2 3 All delete
4 5 6 Delete
7 8 9
0 .
Ok Cancel
Delete the current numbers. ([Delete] or [All delete])
Enter numbers and dots using numeric keypad on the screen.
Select [Ok] and press
To cancel changing the address, select [Cancel] and
press button.
button.
button.
page 18
15