Siemens SL 10 Service Manual page 7

Then use your thumb to press the slide up to separate it from the base. The second stop which
is mounted at the bottom of the slide has to be released at the same time. To do so, push
the bottom of slide upwards and continue pushing the slide with the thumb.
The metal blade can be removed when the stop on the top of base is visible completely.
1. Remove spring and stop from top of base.
Attention:
Flexible cable is very sensitive to any kind of mechanical
damage (e.g. bending, snapping).
1. Use the catch lever to unlock the six catches (see figures
below) in order to separate the top part of the base from the
bottom part of the base.
1. Now detach the flexible cable from the plug on the control module by
undoing the retaining clip on the plug and then pulling the
cable out.
1. Now you have separated the three major parts of the
telephone
a) Slide, b) Top of base, c) Bottom of base
6
4
2
Service Manual SL10
Sm_sl10_lvl2_v11.doc
1.
5
3
1
Page 7 of 23
Private Communication Systems
V1.1
Mobile Phones
a) b) c)
PN MP ST
R. Fleuren
05/98