Using The Tv's Features; Navigating The Menus; Programming Channels Into The Tv's Channel Memory - Toshiba 42HM66 Owner's Manual
Integrated high definition dlp projection television
Hide thumbs
Also See for 42HM66:
- Owner's manual (36 pages) ,
- Specification sheet (2 pages) ,
- Service manual (64 pages)
Table of Contents
Advertisement
7
Using the TV's features
Navigating the menus
1. Press MENU to open the menu system.
menu.
press ENTER and then press EXIT.
Programming channels into the TV's
channel memory
1. Press the TV/DTV button on eht remote control to select the source
(TV).
2. Press MENU to open the menu system.
3. Select the TV/DTV SETTING menu (see "Navigating the menus,"
above).
4. Select the TV SYSTEM sub-menu.
5. Press
to select ANTENNA, CABLE STD, CABLE HRC, or
CABLE IRC and then press ENTER.
6. Press
7
channel scan starts.
Note: To manually stop the automatic channel scan, press EXIT.
20
to select the AUTO SCAN sub-menu.
YES, and then press ENTER. The automatic
Copyright © 2006 TOSHIBA CORPORATION. All rights reserved.
Advertisement
Table of Contents
