Selecting The Video Input Source; Labeling The Video Input Sources; Setting The Clock - Toshiba 42HP86 Owner's Manual

Selecting the video input source

Press INPUT to view a signal from
another device connected to your TV,
such as a VCR or DVD player. You can
select ANT, VIDEO1, VIDEO2, VIDEO3
ColorStream HD1, ColorStream HD2,
HDMI1, HDMI2 or PC, depending on
which input jacks you used to connect
your devices (see "Connecting your
TV" on page 8).
You also can use the Channel
source. In addition to cycling through your programmed channels
(page 24), the Channel
input sources, in the order illustrated below.
ANT (programmed channel)
PC HDMI2

Labeling the video input sources

The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
HD : HDMI device
To label the video input sources:
1. Press TV to select the TV mode.
2. Press MENU, then press
display the OPTION menu.
3. Press ▲ or ▼ to highlight VIDEO
LABEL.
4. Press to display the VIDEO
LABEL menu.
5. Press ▲ or ▼ to highlight the video
source you want to label.
6. Press or
label for that input source.
7. Press EXIT to return to normal
viewing.

Setting the clock

You must set the clock before you can program the ON timer.
To set the clock:
1. Press TV to select the TV mode.
2. Press MENU, then press
display the SETUP menu.
3. Press ▲ or ▼ to highlight CLOCK
SET, then press
4. Press ▲ or ▼ to set the hour, then
press .
5. Set the minutes as in step 4.
After setting the clock, the time
function starts automatically.
6. Press EXIT to return to the normal
screen.
30A0121A_En_p26-30 30
SOURCE SELECTION
0.ANT
1.VIDEO1
2.VIDEO2
3.VIDEO3
4.ColorStream HD1
5.ColorStream HD2
6.HDMI1
7.HDMI2
8.PC
[0-8]:SELECT
Pressing INPUT on the remote
control displays the current
signal source (press INPUT
again or 0-8 to change)
/ buttons to select the video input
/ buttons will also cycle through the video
VIDEO1 VIDEO2
HDMI1 ColorStream HD2
or to
O P T I O N
O N T I M E R
FAV O R I T E C H
C H L A B E L
V I D E O L A B E L
S E L E C T
V I D E O L A B E L
to select the desired
1 . V I D E O 1
2 . V I D E O 2
3 . V I D E O 3
4 . C o l o r S t r e a m H D 1
5 . C o l o r S t r e a m H D 2
6 . H D M I 1
7 . H D M I 2
R E T U R N
S E L E C T
S E T U P
or to
L A N G U A G E
C L O C K S E T
T V / C A B L E
C H P R O G R A M
A D D / E R A S E
.
A D J U S T
S E T U P
L A N G U A G E
C L O C K S E T
T V / C A B L E
C H P R O G R A M
A D D / E R A S E
A D J U S T
Please note the following regarding
the HDMI1 and HDMI2 source selections:
ALWAYS use the VGA port provided to connect a PC.
See "Connecting an HDMI™ or DVI
device" on page 14 and "Connecting a
PC" on page 17 for details.
VIDEO3
ColorStream HD1
O F F
A D J U S T
— / V C R / D V D / D T V
— S AT / C B L
—
—
—
—
—
A D J U S T
Note:
After a power failure or disconnection of the
E N G L I S H power, the clock settings will be lost.
1 2 : 0 0 A M
C A B L E
A D D
S E L E C T
Note:
If the remote control does not operate your TV,
press the "TV" button on the remote control
E N G L I S H
and try again.
8 : 0 0 A M
C A B L E
A D D
S E L E C T
30
5/26/06, 6:25 PM
NOTE: NEVER CONNECT A
PC USING ONE OF THE
HDMI INPUTS.
INPUT DISPLAY
Input
Channel
Numbers
TV
Channel
/
Menu/Enter
Exit