Kenmore 100.80001 Use And Care Manual page 4

! Before
assembling your blender, wipe blender base with e warm sudsy cloth,
then wipe clean with a damp cloth. Dry with a soft ctoth Wash blender jar, lid, collar
and blades in warm, sudsy water Rinse and wipe parts dry
2 Turn bl_,ndet jar upside down Place the
gasket on the blade as_embfy (Figo2)
3 Place the biade assembly withthe gasket
in the bottom openingof the jar (Fig,,3).
4 Twist collar onto jar Be sure to engage
threads properly and securely (Fig.4)_
Turn assemWed jar right side up (FigS)
Fig, 3
Fig. 4
CAUTION:
Bledes are sharp. Handle carefully, t
CAUTION:
NEVERplace blender's motor/base in wateror