Customizing The Recording Eq - Yamaha POCKETRAK C24 Reference Manual

Customizing the recording EQ

The USER recording EQ enables you to customize the level of five EQ bands.
1.
Select "USER" while the recording EQ screen is displayed.
Refer to steps 1–5 in the "Selecting a recording EQ option" section
on page
2.
Press the [STOP] button.
The 150Hz band will be selected and displayed as a black bar.
3.
Press the [
boost.
The selected frequency band will be displayed as a black bar.
4.
Press the [PLAY]/[STOP] buttons to boost or cut the level of the selected frequency
band.
You can boost the level by as much as +12dB or cut the level by as much as –12dB in
1dB steps. The larger value will raise the recording level and boost the frequency band.
Note:
· To adjust the level of other frequency bands, repeat steps 3 and 4.
· To cancel the operation, press the [MENU/FOLDER] button.
5.
Press the [MENU/FOLDER] button.
The USER recording EQ is now customized. Press the [MENU/FOLDER] button to display
the [STANDBY] indicator. Adjust the recording level, then press the [REC] button again
to start recording.
Note:
The recording EQ setting is retained when you turn the power off or change the battery.
However, the setting will be lost if you change the battery without first turning the power
off.
POCKETRAK C24 Reference Manual
15.
]/[ ] buttons to select a frequency band that you wish to cut or
3
Recording Settings
16