Keyguard; Calling Your System Operator - Nokia 121 Owner's Manual

The telephone number disappears from the display. Wait
for an answer.
Send the last part as DTMF tones by pressing MENU
followed by SEND.
Note: When the key tones are turned off, the DTMF tones
are still sent even though you cannot hear them.

KEYGUARD

The phone is fitted with the handy keyguard function which,
when activated, prevents key pressing accidentally while
the phone is, for example, in a pocket. When the keyguard
function is activated, no keybeeps are heard and no key-
presses are accepted, excluding emergency numbers.
To activate the keyguard function:
³ Press MENU *. The KEYGUARD ACTIVE message
appears on the display.
If activation takes place during a call, the message is
shown for a while and the keyguarding begins just after the
call is ended. When the keyguard is active the KEYGUARD
ACTIVE message is shown. When any key is pressed the
PRESS MENU * message is shown. If you receive a call the
phone starts to ring and the blinking CALL message is
shown. To answer the call, with keyguard activated, press
SEND (anykey answer is disabled).
During a call the keyguard is not active and you can op-
erate the phone in the usual way. If the incoming call is not
answered the CALL message will remain on the display.
Calls to emergency numbers can be made as usual. After
the emergency call, keyguard becomes active again.
To deactivate the keyguard function:
³ Press MENU *. The KEYGUARD OFF message
appears and the phone starts to operate in the usual way.
After power-off the keyguard deactivates itself.

CALLING YOUR SYSTEM OPERATOR

Your system may offer this feature which allows you to
make a direct call to the system operator.
To call your system operator:
³ Press 0 followed by SEND.
25