Sony Bravia DMX-WLl Startup Manual page 13

4
Press to
highli~t
Category (equipment
type), and press
U·
Select an equipment type from the list, and
pressQ.
7
Press to highlight Test (Power On/Off)
and pressO·
Test to see if the selected equipment power
turns on and off.
You may need to test more than one code to
find the right code for your equipment.
• If the equipment's supplied remote control has both
POWER ON and POWER OFF bubons, uSing Test
(Power
On/Off)
might not war!< to test the IR code.
Select save and Exit then check If any other remote
bubons will operate your equipment.
5
Press
!
to highlight Maker, and press O.
Select a manufacturer from the list, and press
O·
6
Press
i
to highlight Code, and press O·
Select a code from the list, and press O.
8
When you have found the right cOde..J?ress
highlight Save and Exit, and press
l).
Save the setting and exit from the Setup
menu.
•
S.!~p!lR~ '!.Jias!'!r
H OM I
Cologory
Bo
Maker Sony
Cod!]
Bo ,
Tl!sl (Power On/OII)
Sa .... slid Ex,t
to
See page 15 on Reference Guide if your
code is not on the list.
• When more than one code IS available for your
manufacturer, start checking from the top of the list for
the code that operates your equipment
• Do not connect two of the same equipment from
the same manufaclurer (Eg. two Sony Blu-ray diSC
players), you Will not be able to conlrol each equipment
Individually.
• To erase the code, select Category. then press lIto
highlight "---" and press
0
In step 4.
13