LG 44/52SZ8R Service Manual page 22

(5) Adjustment finishing in case OK.
(6) In case NG, Auto Measure is again practiced in 1~2 times.
In cats NG, adjustment NG is managed to repractice of the 3
times.
(7) Set CA-210 Sync type : Set Sync to univ.
4) RT-44SZ84DB CCA Automatic Adjustment Target Value.
X
RT-44SZ84DB
Coordinate
Cool 275
Warm 313
Medium 283
4) Program Edit.
(1) Model Edit : Interval time and Target White coordinate
that are between command words per Mode, being possible
to correct a common difference.<Fig 17>
275
277
<Fig 17. CCA Automatic Adjustment program main Screen>
(2) Port Edit : CA-210 and RS-232C Connection setting about
SET < Fig 17>.
<Fig 18. CCA Automatic Adjustment program main Screen>
*** To be impossible auto adjustment manual adjustment***
(1) Entry become to IN-START-> Optics Check order using
the adjustment remote controller.
(2) Color coordinates (x, y, L) of White is measured choosing
Full Color.
(3) After Green, Red, Blue using CH-(
coordinates is measured.
(4) Entry becomes to Manual CCA in the ADJ adjustment
mode of adjustment remote controller.
(5) After fitting Color Temp to Normal, measured color
coordinates value of R, G, B, W are input.
Y
Toleramce
Coordinate Temperature
277
6
320
6
297
6
313 283
297
320
E
) key, each color
Color
11600K
6600K
9300K