Important
The wires in the mains lead on this appliance are coloured in accordance with the following
code:
Green and Yellow - Earth
Blue – Neutral
Brown – Live
As the colours may not correspond with the markings identifying the terminals in your plug
proceed as follows:
–
The green and yellow wire must be connected to the terminal in the plug which is
marked with the letter "E" or with the earth symbol
–
The blue wire must be connected to the terminal marked "N" or coloured black.
–
The brown wire must be connected to the terminal marked "L" or coloured red.
SECTION OF THE SUPPLY CABLE
TYPE "H05V2V2-F"
resistant to temperatures of 90°C
230 V AC
50 Hz
REPLACING THER POWER SUPPLY CABLE
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorised service agent in order to avoid a hazard.
•
The supply cable must be replaced with a cable of the same type.
•
The electrical cable must be connected to the terminal board following the diagram of
fig. 6.2.
3 x 0,75 mm
2
230 V
L1
PE
N(L
)
2
Fig. 6.2
or coloured green and yellow.
23