Window Group Move - Sharp IV-C35M User Manual

Setting Measurement Conditions

[6] Window group move

All the window positions set in the measurement
programs for the same object type number can be
shifted horizontally by a specified amount as a group.
[Example of use] Shift the coordinate positions used
3
To set the amount, use "
the" OBJ-TYPE SYS." screen.
1. While "
the up and down arrow keys to select either
"CAM1" or "CAM2." Then press the SET key.
Note: When "CAM1&NG IMGS" is selected for the
currently using camera, the "
CAMERA" item is limited to "CAM1."
2. Select "
"MOVE" by using the left and right arrow keys and finally, press the SET key.
3. Move the cursor (solid line) to the original coordinates before the move using the up, down, left, and
right keys, and press the SET key.
4. Select "COORDINATES STORED" using the left and right keys, and press the SET key. After that
press the ESC key.
The coordinates before the move are now registered.
5. Select "
"MOVE" using the left and right keys and press the SET key.
6. Move the cursor (dotted line) to the new coordinates you are moving to use the up, down, left, and
right keys and press the SET key.
Coordinates of
the original
7. Select "EXEC" (execute) using the left and right keys and press the SET key.
All the windows registered to the same object type will be shifted horizontally at the same time by
the distance between the original coordinates to the new coordinates. After the move is complete,
a "Window group move is complete" message will be displayed.
Original window
- When some part of the window to be moved will move outside of the image display area, the "Out
of range" message will be displayed together with the measurement number and register number.
In this case, select "Continue" or "Halt."
If "Continue" is selected, the window will be shifted to the limit within the image display area.
as data for another object type.
(After copying the data between
object types, move the windows
as a group.)
MOVE ALL WINDOW" in
SELECT CAMERA" is selected, press
STR COORD POSI" (store coordinate position) and press the SET key. Then select
MOVE ALL WINDOW" using the up and down keys and press the SET key. Select
Distance to
move A
Coordinates
of the new
Distance to move A
OBJ-TYPE SYS. SCREEN SAVE
1REGST NG IMG
2HALT ON NG MEAS
3MNTR LIGHT LVL(CAM1) YES
4LIGHT LV COND
5MNTR LIGHT LVL(CAM2) YES
6LIGHT LV COND
7MOVE ALL WINDOW
MOVE ALL WIN SCREEN SAVE
1SELECT CAMERA
2STR COORD POSI
3MOVE ALL WINDOW MOVE(256,240) EXEC
SELECT
New window
3-54
COLOR F C1 BRT
YES
YES
(TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
(TO NEXT SUB-MENU)
COLOR F C1 BRT
CAM1
MOVE(256,240) COORDINATES STORED