Co Indicator Assignment - Panasonic KX-TA308 Installation Manual

4.2 System Programming

[109] CO Indicator Assignment

Enables or disables an extension which was assigned not to ring in programs [408]-[410]
"Flexible Ringing Assignment" to answer an incoming outside call. The CO button indicator
will flash when an outside call is received. If enabled, an extension user can answer the call
by pressing the flashing CO button. If disabled, the user cannot answer the call even if they
press the CO button.
1
Default
!
!
• The extension must be a proprietary telephone with a CO button and indicator.
[110] Flash Key Mode
Assigns the sending of the flash signal mode, MODE 1 or MODE 2, when the
FLASH/RECALL button on a proprietary telephone is pressed.
MODE 1: The flash signal is sent during the programmed time in [418] "Flash Time".
MODE 2: The flash signal is sent while the FLASH/RECALL button is pressed if the
1
Default
• Feature Reference
Section 3, Features
Flash/Recall
0 9
NEXT
Enable
time the FLASH/RECALL button was pressed is more than the programmed
time in [418]. This will be useful to disconnect the current call and make
another call without hanging up. If the time the FLASH/RECALL button was
pressed is less than the programmed time in [418], the flash signal will be sent
during the programmed time.
1 0
NEXT
MODE 1
SELECT STORE
(Enable/
Disable)
SELECT STORE
(MODE1/
MODE2)
[109]-[110]
END
END
System Programming
4-19